KJA build
KJA build
We're to start,
Bought my sj413 about a month ago it was in ok condition but needs a fair bit of work
As it stands at the moment it's got
.spoa
.31" tyres with weller style rims
.vitara 1.6 conversion (was done when I bought it )
.got a cherry bomb exhuast(will be changed for standard)
.bumpers removed
Apart from that its fairly standerd as far as I'm aware
My to do list is fairly big,I hope to get it done by Xmas
.Fix the brakes (spongey pedal,have to pump to make them work)
.change the clutch
.weld a few holes in the footwell
.fix water pump leak.
.find some seats that fit,anyone help on this(standerd ones are knackered)
.door straps
.put some new LEDs in the dials as there really dim
.new windscreen
.fix hand brake
.fix starter motor,any suggestions on a replacement one?
.change front axle(noisy diff bearings)
.fix fuel gauge,only reads quater of a tank
.make front n rear bumpers and sill protectors/rock sliders
.re-cover door cards and make headlining
.fit standerd exhuast,anyone know we're i can get one from
.replace front and rear springs as mine are praticly flat,and possibly fit higher rated ones to the back so it can carry a bit extra
.take it off-road and fix whatever falls off!
Will upload some pictures tomoro as I don't have any one my ipad
Bought my sj413 about a month ago it was in ok condition but needs a fair bit of work
As it stands at the moment it's got
.spoa
.31" tyres with weller style rims
.vitara 1.6 conversion (was done when I bought it )
.got a cherry bomb exhuast(will be changed for standard)
.bumpers removed
Apart from that its fairly standerd as far as I'm aware
My to do list is fairly big,I hope to get it done by Xmas
.Fix the brakes (spongey pedal,have to pump to make them work)
.change the clutch
.weld a few holes in the footwell
.fix water pump leak.
.find some seats that fit,anyone help on this(standerd ones are knackered)
.door straps
.put some new LEDs in the dials as there really dim
.new windscreen
.fix hand brake
.fix starter motor,any suggestions on a replacement one?
.change front axle(noisy diff bearings)
.fix fuel gauge,only reads quater of a tank
.make front n rear bumpers and sill protectors/rock sliders
.re-cover door cards and make headlining
.fit standerd exhuast,anyone know we're i can get one from
.replace front and rear springs as mine are praticly flat,and possibly fit higher rated ones to the back so it can carry a bit extra
.take it off-road and fix whatever falls off!
Will upload some pictures tomoro as I don't have any one my ipad
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: KJA build
Welcome to SCUK.
Bring on the pics. Have a feeling i saw this one on ebay. My KJA is just sat waiting for a gentle restoration.
Bring on the pics. Have a feeling i saw this one on ebay. My KJA is just sat waiting for a gentle restoration.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: KJA build
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: KJA build
Sounds good, with some good plans, but
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Re: KJA build
Looking forward to another KJA resto on here! Can't wait for the pics.
Re: KJA build
Where abouts are you from , may have some bits
SJ 410 currently off road waiting to leap out of hibernation.
Please visit wifes web site http://www.apassionforcakes.co.uk/index.htm you might even find a zuke on there :-)
Please visit wifes web site http://www.apassionforcakes.co.uk/index.htm you might even find a zuke on there :-)
Re: KJA build
Yea was on ebay a few times and didn't sell so I offered the seller silly money,an I'm from Kent (Medway/Maidstone) area
Here's some pics of the anus when I bought it
Here's some pics of the anus when I bought it
- Attachments
-
- image.jpg (234.22 KiB) Viewed 6641 times
-
- image.jpg (234.22 KiB) Viewed 6641 times
Re: KJA build
that looks really tidy man. hope you have fun with it
It's not a question of how much you spend on your suzuki, but when your money will run out