a question for the southern people

The place to socialise, and relax, if it doesn't fit into anything below it fits here, so tell us that joke, or share that story of your last off-road escapade, but remember new comers the virtual drinks are on you!
Post Reply
monkey
Got muddy boots
Got muddy boots
Posts: 9
Joined: Sat Aug 17, 2013 2:46 am
Location: Christchurch, Dorset

a question for the southern people

Post by monkey » Wed Aug 28, 2013 8:17 pm

Where does everyone get there sheet steel from, as found some tin worm wholes that need plugging up.

And as usual don't have any when i need some.
Top
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Re: a question for the southern people

Post by Ladaman » Wed Aug 28, 2013 8:35 pm

Being a "Northerner" I'm not really being asked this, I've just butted in. :hahaha:

If it's just bits and pieces you want, look up a local fabrication shop, they generally give you off cuts from the scrap bin, or just charge you a token amount.

They will probably cut you specific things too if you wanted, and at a good rate.

Always worth asking.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
User avatar
rory-ray
Engaged 4wd low
Engaged 4wd low
Posts: 101
Joined: Sun Aug 04, 2013 11:04 pm
Location: Bristol

Re: a question for the southern people

Post by rory-ray » Wed Aug 28, 2013 8:41 pm

Yellow pages,look for engineering places and metal fab's there never short of anything, a small amount of beer tokens will see you fine! Especially on a Friday people are more inclined to have a bit of cash n there pocket ive found

We got 2x sheets of 3foot by 4 foot steel chequer plate the other week for £10!!
1994 Pick Up Converted Vitara



+2" Springs, Pro Comp Front And Rear Shocks, 31" Marshalls On 8j's, Front Winch Bumper, OMP Steering Wheel And Boss, Bucket Seats, Stripped Out, Black Bonnet With Scoop, Few Dents And Scratches, Little Rust!!!
Top
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: a question for the southern people

Post by turbo-tom » Wed Aug 28, 2013 9:15 pm

local fabrication companys do it for me. and i advertise for them so i get discounted prices win win :)
Tom :)

Ford Fiesta ST :D
Top
User avatar
NylonAdmiral
Winching along now
Winching along now
Posts: 521
Joined: Wed Apr 03, 2013 8:39 pm
Location: Devizes, Wiltshire
Contact:
Contact NylonAdmiral

Re: a question for the southern people

Post by NylonAdmiral » Wed Aug 28, 2013 9:24 pm

I get mine from a place called Devizes Steel Supplies as they're about 10min away from me but unfortunately quite a way from you.

Pretty much any steel yard / fabricator / engineering shop should be able to supply you what you need I would think?
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: a question for the southern people

Post by ScottieJ » Wed Aug 28, 2013 9:40 pm

I used to work in a sheet metal fab shop so I just go see my old boss :smokin:

might even try and get my job back next time :er:
Zuki Build

Steady as she goes!
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: a question for the southern people

Post by Jordi » Wed Aug 28, 2013 9:46 pm

If i'm wanting decent steel i buy from a local steel stockholder. For smaller odd n sods i ask about for scraps at local engineers / machine shops.

If you catch them on a good day it can be for nothing.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1828
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: a question for the southern people

Post by mike harris » Wed Aug 28, 2013 9:52 pm

Pyramid steel? In aldershot?

Go onto metal supermarket and you can have it delivered.

I bought a sheet of eBay the other day !! It's really cheap on there 350 mm x 350mm x 6mm £16 delivered !!

Mike
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: a question for the southern people

Post by Jordi » Wed Aug 28, 2013 9:57 pm

mike harris wrote:Pyramid steel? In aldershot?

Go onto metal supermarket and you can have it delivered.

I bought a sheet of eBay the other day !! It's really cheap on there 350 mm x 350mm x 6mm £16 delivered !!

Mike
Hmmmm..... I call that an off cut / scrap, it's only 13.5" square. I got same size (roughly) hardox wear plate FOC from a engineers i collect from.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
monkey
Got muddy boots
Got muddy boots
Posts: 9
Joined: Sat Aug 17, 2013 2:46 am
Location: Christchurch, Dorset

Re: a question for the southern people

Post by monkey » Wed Aug 28, 2013 11:59 pm

Well i'm really after a 8"x4" sheet of 1mm/1.2mm, as i am going to need a fair bit for the unimog that i've got to sort out too.
But just wanted to see if there was anywhere that some of you guys go/recommend.
Top
Post Reply

Return to “The Bar”