KJA build

[ianedwards]

Hi, thought i had seen it some where. (ebay)

nice to see another kja build, good luck. got a bit more to do on mine but its nearly there. if you want some advice just ask.

Ian

[OllieSJ]

I really like that any news on the build ??

[Jack6835]

Not been on here a while been flat out at work but I have been doing some bits to the anus/buying goodies whilst at work, got myself a winch bumper,some pro comp shocks and some kumo road Ventura mt for £100 but apart from that I've painted the inside of the front tub,done the clutch,water pump and cam-belt,and I've spent the last two days trying to wire up indicators and headlights as some bodger before me had about a million wires connected to the headlight doing nothing so I striped it back and re wired it and I also had to un plug the (Spanish headlight relay thing?)

### few questions,

My anus has got the vin number/plate to say its Spanish built but it has the round indicators switches,is this normal?

My anus came with a 1.6 conversion but the intake hits on the bonnet so it won't shut properly what can be done about this?

Were can I get a fuel pump gasket?

I have some very un happy looking springs and I've heard bad things about add a leaf and don't want to buy lift springs because its already spoa,is there anywhere I can buy standard leaf springs or some that will fit?

Thanks for the help,will get some more pictures up soon

[donkeychomp]

Nice zook! I think the round indicator stalks were Japanese only...could be wrong though...

[dan_2k_uk]

My anus came with a 1.6 conversion but the intake hits on the bonnet so it won't shut properly what can be done about this?

Were can I get a fuel pump gasket?

How high the 1.6 is will depend on the carb fitted. If it has a SU conversion on a adapter elbow they are normally too high so you could swap to a custom manifold from Rockwatt.

The fuel pump gaskets normally come in the headset kits so must be about to buy individually too.

[Jordi]

If thats the only gasket you need just get a sheet of gasket paper and cut hour own. Its easy enough.