came across a problem today when i went to bleed them, because the bleed nipple is at the front whn mounted on an sj axle instead of near the top when mounted to a vit.
Air gets trapped in the top of the caliper so you need to take the caliper off, wedge a bit of wood in there and bleed them with the nipple at the top, going to do this on wed night so i will take a few pics.
do vitara discs and callipers fit straight onto sj axles?
Re: do vitara discs and callipers fit straight onto sj axles?
hi scottiethe vitara ur saying what is what model..? dose it need to do modification on the axles or or just fix it straight..?
i wanna replace my my sj410 front drum with dics brake...
Re: do vitara discs and callipers fit straight onto sj axles?
Hi,,, ive got a complete front axle here with disc/calipiers hubs etc,, easy to pull your axle out and stick this one in!!.malie wrote:
the vitara ur saying what is what model..? dose it need to do modification on the axles or or just fix it straight..?
i wanna replace my my sj410 front drum with dics brake...
andy
Re: do vitara discs and callipers fit straight onto sj axles?
Drums on the front of a 410????? must be an early one! i'm guessing they have the same set up as the LJs then??? in that case here is a write up!
http://www.lj10.com/howto/discbrakes/
The calipers and discs i have used are of a 91 swb 1.6 8v vit, however any vitara brakes should fit.
Oh and Andy, Malie lives in Brunai, dont think you'll be wanting to ship a complete Axle there it might be a bit expensive
http://www.lj10.com/howto/discbrakes/
The calipers and discs i have used are of a 91 swb 1.6 8v vit, however any vitara brakes should fit.
Oh and Andy, Malie lives in Brunai, dont think you'll be wanting to ship a complete Axle there
it might be a bit expensive