New Member And Bought an SJ Today
New Member And Bought an SJ Today
Just got this home, What do you reckon?
it has 62k on the clock the only issue is a binding caliper.
it has 62k on the clock the only issue is a binding caliper.
- Attachments
-
- IMG_4103.JPG (2.33 MiB) Viewed 6203 times
- Tramp
- Suzuki, will you marry me?
- Posts: 2829
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: New Member And Bought an SJ Today
Nice buy, I like hardtops, it looks like the original bumper is cut down on the front (the corners) then your trim along the sill is missing, and has been chequer plated - bet it's rusty behind the chequer plate! Then your bumper corner caps are missing on your rear bumper. I don't know what the deal is with heater inlet vents ( under your windscreen) usually it's just slotted holes, yours seems to have some sort of hood over it, overall it looks pretty tidy,
Re: New Member And Bought an SJ Today
yer i was aware of all of the above. Do you reckon it has had a lift? Anyway of checking?
- Tramp
- Suzuki, will you marry me?
- Posts: 2829
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: New Member And Bought an SJ Today
To be honest it looks about standard height, I'd guess it was as it still has the anti roll bar fitted and usually it's the first thing to go
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: New Member And Bought an SJ Today
It looks lifted to me. A low angle shot from the front or back will probably tell us what kind of lift if it has one.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
Re: New Member And Bought an SJ Today
Here are few pics underneath, the front springs are almost flat.
- Attachments
-
- IMG_4105.JPG (2.73 MiB) Viewed 6185 times
-
- IMG_4106.JPG (2.49 MiB) Viewed 6185 times
Re: New Member And Bought an SJ Today
im looking to use the truck for a bit of laning and off roading what mods would you lot advise doing first
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: New Member And Bought an SJ Today
Looks like a nice tidy standard Zuk!
Ideal toy for laning with some decent MT tyres on it.
Ideal toy for laning with some decent MT tyres on it.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: New Member And Bought an SJ Today
Well, it looks standard underneath. It just looked to be riding a bit high to me.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: New Member And Bought an SJ Today
Decent new springs or possibly 1" or 2" lift springs?
The rears do seem to show quite a bit of curve still.
The rears do seem to show quite a bit of curve still.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank