Forum
Re: Forum
Once again, Thanks so much, feel real welcome !! Hope to put a pic up soon and if anyone does have any info for me at any time brill. One question, when i start fumpa from cold - ok, when warm, have to lift bonnet, connect brown and yellow wire from coil to brown and yellow wire from loom, turn engine over until it tries but won't run, disconnect wire start her again - runs no probs ?
Re: Forum
HELPPPP ! Could anyone tell me what the brown and yellow wire going to the coil is for on my zuki santana ? Bugger won't start till i connect it and then dissconect it when she's warm ?? fine when she's cold tho ?? Please help me if you can, Ta
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Forum
Try replacing your coil... those wires connect the coil to the distributor so one of them is probably at fault
Is it a 1.3 or a 1.0???
Also please don't post the same thing over and over in different places
Is it a 1.3 or a 1.0???
Also please don't post the same thing over and over in different places
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Forum
How to check your ignition coil:
- Attachments
-
- coilcheck.jpg (92.94 KiB) Viewed 5872 times
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
dominic
- Can I have a tow
- Posts: 482
- Joined: Mon Apr 14, 2008 7:48 pm
- Location: Ireland at the moment. originally London.
Re: Forum
bearNice one.
We will all try and help and give any advice.
As im not in you neck of the woods, I cant help on garages.
Currently Drive
SJ 410 Q 1985 (GREEN)
VITARA GL+ 2017 (SILVER)
Did have a IGNIS SZ5 4X4 2017 (BLACK)
Did have a GRAND VITARA 2.0 TD 2002 (GREEN)
Did have a JIMNY JLX 2001 (RED)
Did have a SJ 413V 1987 (SILVER)
Did have a BMW320i 1984 (PETROL BLUE)
SJ 410 Q 1985 (GREEN)
VITARA GL+ 2017 (SILVER)
Did have a IGNIS SZ5 4X4 2017 (BLACK)
Did have a GRAND VITARA 2.0 TD 2002 (GREEN)
Did have a JIMNY JLX 2001 (RED)
Did have a SJ 413V 1987 (SILVER)
Did have a BMW320i 1984 (PETROL BLUE)
no joy. Twiss, could it be a fuel problem as it only happens when hot ?? vapourising in pipe ?? Any ideas 
Re: Forum
This is how the coil should be wired up.
Can you post a photo of your wiring please?
- image.jpg (63.02 KiB) Viewed 5837 times
Re: Forum
Will do asap. Seems to be a green wire to +, a lead going to nothing (brown and yellow) which, when she won't start i connect to the one coming from the loom and she will fire but not run, disconnect and off she goes ??
Seems to be tho, if i leave her to cool this also works and she's a little lumpy till i put my foot down so ... fuel ? going to give her a full check over this weekend
Seems to be tho, if i leave her to cool this also works and she's a little lumpy till i put my foot down so ... fuel ? going to give her a full check over this weekend