Suzuki Club UK

Can't get ARB compressor working so hooked a line to my workshop compressor @ 50psi and no engagement, lifted off the floor wheels still spin on opposite directions as norm. No air leak from outside of diff just a slight hiss from breather??

.... and now leaking oil seals

Lersman wrote: ↑

Thu Aug 29, 2019 6:43 pm

Can't get ARB compressor working so hooked a line to my workshop compressor @ 50psi and no engagement, lifted off the floor wheels still spin on opposite directions as norm. No air leak from outside of diff just a slight hiss from breather??

ARBs need around 70psi to engage but ARB recomends 100-150psi.

There shouldn't be a hiss from the breather and is the leak coming from the axle oil seals? if so the ARBS might need new O-rings on the end flange.

Lersman wrote: ↑

Tue Aug 27, 2019 6:39 pm

Any chance of full access...? Pretty please.. as l need to clear some of these sj parts I've been hoarding and create some space?

What ya got ???

5x 35"x12.5" bighorns on max offset black steel rims nearly new, sj lift springs, props with newish uj's, Vitara ps setup Inc wedge,d shackles,tin top rear door,413 calipers,discs,drums master cylinders, vit soft top, set of tatty Weller's,hif38 + adapter and inlet manifold etc...

I will up psi and have another go.. cheers