Page 2 of 2
Re: HELP PART NEEDED
Posted: Sat Aug 03, 2013 8:58 pm
by dazerede
Ye I see what u are saying might have a look tmoz
Re: HELP PART NEEDED
Posted: Sat Aug 03, 2013 11:24 pm
by Darrell
I believe the Spanish 410 is not the same as the UK model although according to the Spanish wiring diagram it only has one extra wire. Most of these hazard light switches on ebay are car specific and normally only have a few wires (Well modern cars,anyway). The SJ switch connects power to the relay and joins the indicator circuits. This after market switch will replace the SJ one if you can't find an original.
As said it would be useful if you could photograph the original one and better still if you could photograph the wiring connected to it, so we can see the wire colours.
- ki.png (107.75 KiB) Viewed 3031 times
I assume you know the hazard light circuit has it's own fuse
Re: HELP PART NEEDED
Posted: Sun Aug 04, 2013 9:51 am
by beegee
FIXED IT ,!!!, SOAKED IT WITH WD4o overnight, CLEANED CONTACTS, PERFECT, THANK YOU ALL VERY MUCH, NOW OFF TO THE ITV STATION TO GET IT TESTE D AND PASSED. YIPEE!!!
Re: HELP PART NEEDED
Posted: Sun Aug 04, 2013 12:17 pm
by Anton
Re: HELP PART NEEDED
Posted: Sun Aug 04, 2013 1:03 pm
by Edweird
beegee wrote:FIXED IT ,!!!, SOAKED IT WITH WD4o overnight, CLEANED CONTACTS, PERFECT, THANK YOU ALL VERY MUCH, NOW OFF TO THE ITV STATION TO GET IT TESTE D AND PASSED. YIPEE!!!
Glad to hear it.