Page 1 of 1

problem with oil leaking

Posted: Sat Jan 17, 2015 6:06 pm
by daemon982
hi

I have a problem with my vitara engine 1.6 8v carb (G16A)

I attached some pictures:

this is were the fuel line in is and under this line is a hole, where the oil is spitting out off, can someone help me, why this is happening? :?:

Image

this is the hole, where the oil is coming out of.
Image

Re: problem with oil leaking

Posted: Sat Jan 17, 2015 8:49 pm
by donkeychomp
Hard to tell where that hole is but it looks like it's missing a bolt. Put one in.

Re: problem with oil leaking

Posted: Sat Jan 17, 2015 8:56 pm
by ScottieJ
that's the vent for the fuel pump. Oil leaking from there can be a sign of a build up of positive crankcase pressure. Could be a blocked PCV valve.

Either that or its actually a mix of fuel and oil, meaning it's the daiphragm that has a split so a new fuel pump is needed.

Re: problem with oil leaking

Posted: Sun Jan 18, 2015 8:57 am
by daemon982
there is no mix of oil and fuel just oil coming out.

Re: problem with oil leaking

Posted: Mon Jan 19, 2015 12:27 pm
by courior
I thought there was a seal between the pump and block. Maybe that has gone?

Re: problem with oil leaking

Posted: Mon Jan 19, 2015 12:31 pm
by ScottieJ
The fuel pump gets a small feed of oil through the push rod hole off the cam for lubrication.

I would check the PCV valve is working and if that's ok then it could be a worn seal on the diaphragm lifter rod.

Image

http://www.acksfaq.com/mechanical_fuel_pump.htm

Re: problem with oil leaking

Posted: Mon Jan 19, 2015 2:42 pm
by daemon982
First i will check PCV valve, this is the easiest fix, if this is the problem.
Will report back to you.

Re: problem with oil leaking

Posted: Tue Jan 20, 2015 8:43 pm
by daemon982
update

I have cleaned PCV valve and seams that that have solved the problem. :armsup:

thank you for all the help :thumbup:

Re: problem with oil leaking

Posted: Tue Jan 20, 2015 9:08 pm
by donkeychomp
I was useless but glad it's all sorted!

Re: problem with oil leaking

Posted: Tue Jan 20, 2015 9:24 pm
by ScottieJ
Glad to hear it was a simple fix.