Page 1 of 2
Request for replacement carb/fuel injector . (Mikumi model)
Posted: Fri Mar 11, 2016 11:28 am
by mikephilo
Hi, I would be grateful for any advice/help any members can give me.
My 1998 Suzuki Samurai/ SJ 413 has emission issues and needs a replacement/refurbished fuel injector. It’s a Spanish (Santana Motors) build and Suzuki dealers in Spain, UK & Germany only seem to have carb details and no record of the fuel Mikumi injector fitted and quote a part number for a carb
Details are as follows. (Mikumi model) Mono injector carb as fitted to G13BA engine. This was fitted to various models of Suzuki, 1989 Sidekick, 1989–1997 Swift, 1985 onwards Samurai/SJ413. The VIN # of my Samurai is VSESJS00C00208630.
Other than repair, can anyone suggest a replacement, bearing in mind it has to conform to emission levels with a catalytic convertor fitted.
Does anyone know if ADK is still trading as no emails/calls answered for past few weeks.
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Fri Mar 11, 2016 6:25 pm
by Anton
Are the injectors the same as the ones on the 8v Vitara SPI models? I'm just wondering if you could scavenge the parts you need from a Vitara - SPI 1.3's are rare where SPI 1.6's are fairly commonplace. Another option is perhaps getting a whole Vitara 8v or 16v engine and ECU and upgrading to a Vit engine - as I'm certain the parts for those are easy to get.
Plus you'll have a more driveable vehicle.
Your other option might be to convert to carb, my (non cat) carb'd 1.3 has rediculously low emissions:
I don't know if that's low enough for your vehicle to pass, but I imagine it is... I
think from 1986 until about 2002, you had to get below 3.5% CO, and I'm under 1%, so even if mine was a 1986+ (it's a 1985 so I only have to aim for 4.5) I'd still be fine.
Don't quote me on that, especially if you're not in the UK...
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Fri Mar 11, 2016 6:40 pm
by twiss
Ive sent my parts guy here in malta a message to see if he has them. There is a rental company in Gozo that has a few of the injection models so he normally keeps parts in stock for them
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Fri Mar 11, 2016 11:56 pm
by Darrell
Blooming expensive
This is the only injector I can find for the Samurai, hope there all the same
.
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Sat Mar 12, 2016 12:04 am
by twiss
my guy here can't get them :(
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Sun Mar 13, 2016 8:48 am
by mikephilo
Darrell wrote:Blooming expeellrrnsive
This is the only injector I can find for the Samurai, hope there all the same
.
Darrell, looks familiar, and similar to mine!!
Could you send me a link to the source please, and you say its pricy, whats the cost and the supplier please. Very grateful, you are the closest so far after worldwide enquiries so
Mike
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Sun Mar 13, 2016 8:49 am
by mikephilo
twiss wrote:my guy here can't get them :(
Thanks Twiss
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Sun Mar 13, 2016 8:52 am
by mikephilo
Anton wrote:Are the injectors the same as the ones on the 8v Vitara SPI models? I'm just wondering if you could scavenge the parts you need from a Vitara - SPI 1.3's are rare where SPI 1.6's are fairly commonplace. Another option is perhaps getting a whole Vitara 8v or 16v engine and ECU and upgrading to a Vit engine - as I'm certain the parts for those are easy to get.
Plus you'll have a more driveable vehicle.
Your other option might be to convert to carb, my (non cat) carb'd 1.3 has rediculously low emissions:
I don't know if that's low enough for your vehicle to pass, but I imagine it is... I
think from 1986 until about 2002, you had to get below 3.5% CO, and I'm under 1%, so even if mine was a 1986+ (it's a 1985 so I only have to aim for 4.5) I'd still be fine.
Don't quote me on that, especially if you're not in the UK...
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Sun Mar 13, 2016 11:05 am
by Darrell
I just "Googled" the part number, this is one of the suppliers
http://www.rockauto.com/en/catalog/suzu ... tor%2C6224
It shows one brand as "Standard motor products TJ63", when I "Googled" that lots of suppliers showed up.
Re: Request for replacement carb/fuel injector . (Mikumi mod
Posted: Mon Mar 14, 2016 6:56 am
by daemon982
Hi
I have the whole injector unit from suzuki samurai G13BA, do you only need the injector?