Page 1 of 1
F8 F10 engine crank spigot bearing
Posted: Mon Mar 14, 2016 1:17 pm
by Tonypp
Hello, About to rebuild a F10 engine which has the spigot bearing in the crankshaft, not in the flywheel like the later engine do. Anybody know what size they are or where they can be purchased from. Any ideas ?
Re: F8 F10 engine crank spigot bearing
Posted: Mon Mar 14, 2016 7:32 pm
by Darrell
I've put this together...
Re: F8 F10 engine crank spigot bearing
Posted: Mon Mar 14, 2016 9:02 pm
by Tramp
Darrell wrote:I've put this together...
Thanks Darrell, your always there to throw up a quality parts diagram, we probably don't appreciate you as much as we should!
Re: F8 F10 engine crank spigot bearing
Posted: Tue Mar 15, 2016 7:18 am
by Tonypp
Thanks Darrell, I had measured the crank hole and input shaft and was looking for a 10x 15x 15mm needle roller but nobody seemed to list that size. I then presumed i had measured something wrong. Looking at your pictures, did you go direct to a Suzuki parts dealer ?
Re: F8 F10 engine crank spigot bearing
Posted: Tue Mar 15, 2016 7:15 pm
by Darrell
The diagram is just a page saved from here
https://translate.google.co.uk/translat ... egion%3DAR with a couple of photos and info added after I "Googled" the part numbers.
Re: F8 F10 engine crank spigot bearing
Posted: Tue Mar 15, 2016 8:40 pm
by Tonypp
Used your picture Darrell and searched Google again. Found the right size from a UK company for a fair price and they will post to Cyprus. Thanks for your help.