Page 1 of 1
New here
Posted: Sun Dec 30, 2012 4:39 pm
by duncslow
Hello folks, new here, been round the web for ages looking how to fit a vit engine in a 410 and found lots of useful info here so I thought Id better join up. There will be lots of questions I should imagine, unless theres a good faq.
Ill try and get some pics up.
regards Chris
Re: New here
Posted: Sun Dec 30, 2012 5:11 pm
by Jay18
to do a 1.6 vit engine in your 410 youll need:
1.6 8v Vitare engine
SJ413 gearbox
gearbox to engine adaptor
skinny starter
move one of the engine mounts foreward (not sure which one)
413 exhasut (i think)
and there might be more just cant think off the top of my head...
ask Scottie about it he has done the swap into his 410...
Re: New here
Posted: Sun Dec 30, 2012 5:23 pm
by Jordi
Welcome to the forum. Good luck with the conversion.
Jordi
Re: New here
Posted: Sun Dec 30, 2012 5:30 pm
by turbo-tom
Welcome
Re: New here
Posted: Sun Dec 30, 2012 6:19 pm
by ROBBIE
Hi
Re: New here
Posted: Sun Dec 30, 2012 7:02 pm
by ScottieJ
to :suzuki:clubUK matey
My conversion was different to your average 1.6 into 410 though as I run the vit gearbox and twin transferboxes.
However I pretty much just extended the drivers engine mount forwards using some 50x50x4mm angle welded onto the chassis with a few gussets. Then made some adapter plates to bolt up the mounts to both engine Mounts, only got a pic of the extended chassis mount though sorry
Re: New here
Posted: Sun Dec 30, 2012 7:16 pm
by duncslow
Cheers for the replys folks. Been on the facebook page and someones going to cut off some 413 chassie mounts so I can weld them in the right place. :-)
Re: New here
Posted: Sun Dec 30, 2012 7:44 pm
by ferris
to the club
.
Re: New here
Posted: Mon Dec 31, 2012 4:43 pm
by Darrell
Hi Chris
Re: New here
Posted: Mon Dec 31, 2012 6:03 pm
by dazerede
welcome to scuk chris