Page 1 of 1
suzuki sj410 gear and transfer box problems
Posted: Sat Jan 18, 2014 12:41 am
by sam_richards_231
started my suzuki sj410 project and cleaned it all down and started stripping it and looking ok.
Iv come across a problem tho and im not sure what it is i put my sj410 in to N on the transfer box and then put my normal gear in to say 1 to 5 and the gear box and transfer box shakes and vibrates any body have any ideas at all thanks sam
Re: suzuki sj410 with 1.6 ford crosflow
Posted: Sat Jan 18, 2014 1:06 am
by dan_2k_uk
If its not accompanied by a load of noise then probably a bad mount on the transfer box or a tight UJ in the little prop between the gearbox and transfer box.
Re: suzuki sj410 with 1.6 ford crosflow
Posted: Sat Jan 18, 2014 8:04 am
by sam_richards_231
Ok then mate ill have to have s look at that then and see if its 1 of them problems
Re: suzuki sj410 with 1.6 ford crosflow
Posted: Sat Jan 18, 2014 8:26 am
by sam_richards_231
I forgot to say that there is some noise there aswell thanks sam
Re: suzuki sj410 gear and transfer box problems
Posted: Sat Jan 18, 2014 6:38 pm
by ScottieJ
I'm pretty sure you aren't supposed to really put the tbox in neutral and then run it through the gears, prob why your Tcase is shaking about
but whip the intermediate prop out and check the UJs on it, if one has gone stiff that could cause this.
Re: suzuki sj410 gear and transfer box problems
Posted: Sat Jan 18, 2014 10:29 pm
by sam_richards_231
Ok mate and i didnt mate my mate did it and said to me so and ill have a look at that tomorrow then mate thanks
Re: suzuki sj410 gear and transfer box problems
Posted: Sun Jan 19, 2014 9:09 am
by dazerede
Looks smart mate just need to spray ur runs white and it will look sick mate
My t box shacks a bit in 2wd doing 60 lol