need to do another 10 posts before I can view the for sale section.Managed to remove a transfer box in record time under a minute !

..

Appear to have the sj bug now as well as ongoin issues with 413 my 410 whilst playing today decided to drop its transfer box on a rather steep slope resulting in the propshafts trying to eat the car rear axle ripped forward all a bit messy anyway now have dead 410 which will sell for spares but it h...

Thankyou gentleman yes it was modified and bodged before I got it.Yes both front wheels spinning in same direction appears that the housing has been opened as it has sealant on it. So why weld the front diff diff lock yes great but effectively you would have to use it in 2wd until you got stuck then...

Ok jacked up hubs operate and engage and disengage as they should only thing is that when the hubs arelocked in the prop shaft from the front axle to the transfer box also turns.If i chock one wheel with the hubs locked in its fighting itself

Yes with hindsight the Clock comparison was being thick

I had a fourtrak with manual hubs and that one you could drive slowly on tarmac from say field to field and you could tell it was in 4wd but steering would turn the sj is like the steering wheel is tied up.The fourtrak did have power steering mind.will try it on some soft ground and see what it feel...

Have manual free wheeling hubs on sj 413 when I engage them it wants to go straight as if it has diff lock and you are fighting the steering it physicaly wont turn Any ideas ? Im correct in saying that with both front wheels off ground and hubs locked they should both turn and inturn the shaft from ...

found 1 return vac pipe with hole in and altered timing manualy by ear not light until it runs without have the flat spots i had to move it nearly all possible adjustment counter clockwise.now accelaerates better but backfires when you back off the throttle smells quite rich.blew out fuel lines and ...

no did think that but it runs lovely on tick over am going to check the fuel lines are clear and empty the tank,just think im missing something,will look attiming also.In the distributor housing there is something that looks like a cross between points and condensor what is that called and is it pro...