Jimny flywheel dimension

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Jimny flywheel dimension

Post by Ladaman » Sat May 25, 2013 6:31 pm

A bit of a different request to most.

Has anyone got a Jimny M13A engine, or more specifically the fly wheel available to carry out a quick measurement for me?

I need to know the size of the step on the fly wheel from where the friction plate runs, to where the cover plate bolts on. I think its about 3mm. It dimension X on the attached drawing.

If it could be measured with a digital vernier or something accurate it would be a big help, but just by a rule will get me out of a sticky situation.

Thanks.
Attachments
Suzuki Jimny flywheel.jpg
Suzuki Jimny flywheel.jpg (27.76 KiB) Viewed 3215 times
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Re: Jimny flywheel dimension

Post by Ladaman » Mon May 27, 2013 3:34 pm

I've got this measured now.

If it is ever needed for future the dimension is 2mm dead on.

I just need to adjust the spacers I made now.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
Post Reply

Return to “SJ series Transmission, Axles, Brakes, wheels and tyres.”