That's the color I want to make mine lol. With lots of black bar work. Getting mine professionally painted by a mate for $200 cash sometime next year hopefully. I probably should get off this damn site and go do some work on my truck.
Looking really good hopefully get to see it in person one day
Kiwizook's resto
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Kiwizook's resto
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Kiwizook's resto
Loving that green 
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Kiwizook's resto
Mates rates I guess. Not much zuk to paint front clip bonnet and tub. So I guess that's why
1984 Suzuki SJ410q Winch Truck (Work in Progress)
Re: Kiwizook's resto
front axle is being ripped apart as we speak, just can't get two screw out of one of the free wheel hubs, and I am also missing one, and most are damaged because they were so difficult to get out. anyone recognize these fwh's?
- Pic_1217_305.jpg (432.65 KiB) Viewed 6509 times
- unidentified fwh
- Pic_1217_306.jpg (397.88 KiB) Viewed 6509 times
It's not a question of how much you spend on your suzuki, but when your money will run out
Re: Kiwizook's resto
AVM hubs......depending on the year they were made they are either good or really crap 
Re: Kiwizook's resto
they look like all steel inside,and seem to work quite well, but as you can see I have had to slot those screws to get them out, as the allan head was worn out, so I want to replace the screws if possible, but the heads seem to be of a strange taper, and my local hardware store could not find replacements, and they are quite good!
It's not a question of how much you spend on your suzuki, but when your money will run out
-
Darrell
- Suzuki, will you marry me?
- Posts: 2988
- Joined: Wed Feb 23, 2011 7:54 pm
- Location: south oxfordshire
- Contact:
Re: Kiwizook's resto
To the best of my knowledge those bolts are specials and blooming expensive.
On fleabay at $4.50 each
The SJ/Samurai should have model number AVM 438 fitted.
The service kit including new bolts is 4438, if you can find anybody selling it.
On fleabay at $4.50 each
The SJ/Samurai should have model number AVM 438 fitted.
The service kit including new bolts is 4438, if you can find anybody selling it.
- Attachments
-
- 1408872506324_bulletin.jpg (28.23 KiB) Viewed 6483 times
2005-GV 1600se, "Hell" What do I know!
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Kiwizook's resto
I'd be tempted to weld the head up and use an angry grinder to grind them back and make them permanently into flat head "screws". Basically what you've already done, but a tad stronger.
Or plug weld a nut to the top of each one to turn them into "normal" bolts? They might be a bit too small for that though.
Or plug weld a nut to the top of each one to turn them into "normal" bolts? They might be a bit too small for that though.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Kiwizook's resto
err...why did I just see Anton's face in his avatar? Now it's a car. Am I that drunk?
If it ticks over...leave it