Should make some more good progress next weekend hopefully.
Was Ralph's Tin Top, Now it's Adams after 2 other owners.
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
I used the same size on Johns Sj
Should make some more good progress next weekend hopefully.
Should make some more good progress next weekend hopefully.
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
Proper job!NylonAdmiral wrote:My plan is to just do everything once and do it right so that the truck will last a long time.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
It looks quite "normal" in the pic Scottie's put up, but it looks huge on the earlier pic. It might just be the big open hole in the end.
Nice work though.
Nice work though.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
NylonAdmiral
- Winching along now
- Posts: 521
- Joined: Wed Apr 03, 2013 8:39 pm
- Location: Devizes, Wiltshire
- Contact:
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
I know what you mean though, in the first picture it looks like we've just welded on an RSJ that I had lying around in the garden or something.
Hopefully I'll hopefully have pictures of it looking better soon though.
Hopefully I'll hopefully have pictures of it looking better soon though.
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
-
ROBBIE
- I spend far too much time on here
- Posts: 4555
- Joined: Tue Sep 09, 2008 6:32 pm
- Location: Dorset or stuck
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
Looking good 
But I will say mine was bigger
But I will say mine was bigger
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Jimny 1.6 not as good as an SJ but still good
-
NylonAdmiral
- Winching along now
- Posts: 521
- Joined: Wed Apr 03, 2013 8:39 pm
- Location: Devizes, Wiltshire
- Contact:
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
Unfortunately I've not managed to get any further welding done this week, but I'm hoping to do a little more this evening.
On the plus side I picked up a 16v Vitara as an engine donor last night
On the plus side I picked up a 16v Vitara as an engine donor last night
1.6 16v, Rock Lobster, PAS, Muddyzook rear disc conversion, coated in Raptor, 33in x 10.5, heated seats, lovingly restored by Scottie!
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
nice work Scottie-
Martin86
- Can I have a tow
- Posts: 327
- Joined: Tue Dec 21, 2010 10:05 pm
- Location: Ipswich, Suffolk
- Contact:
Re: Was Ralph's Tin Top, Now it's Adams after 2 other owners
Anymore Progress on this guys ? 