Well hello if I put a 2" body lift on my jimny will i need to do owt toBumpers or will there b a 2" gap cheers hobbo
Body lift jimny
Body lift jimny
Well hello if I put a 2" body lift on my jimny will i need to do owt toBumpers or will there b a 2" gap cheers hobbo
Re: Body lift jimny
Why do you want to do a body lift? what size tyres are you trying to run?
Re: Body lift jimny
The body lift will just lift the body up from the chassis.
As Scottie says what size tyres are you running?
As Scottie says what size tyres are you running?
Re: Body lift jimny
Got 31 10.50/15 but think they r 2 big. Wot tyres would go on and give more life got 32mm spacers on aswell and just want it abit higher just out of preference
Re: Body lift jimny
How much suspension lift do you have?
Tbh I would rather trim for clearance than do a body lift, I've never been a fan of body lifts. Raising the body does nothing to improve off-road performance.
Tbh I would rather trim for clearance than do a body lift, I've never been a fan of body lifts. Raising the body does nothing to improve off-road performance.
Re: Body lift jimny
I have 31s on with a 2" suspension lift, but I needed to get the angle grinder, jigsaw and hacksaw out to achieve that. It also depends on tyres too, I would fit then trim what needs to be removed but it will be tight.
Re: Body lift jimny
Will it need much trimming off and will it effect the full lock
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Body lift jimny
It doesn't affect the full lock.
You have to trim around the flat face of the plastic arch and remove the metal behind it.
You have to trim around the flat face of the plastic arch and remove the metal behind it.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.