Fwb's SJ410 Build
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Fwb's SJ410 Build
remember if you are using a sammy gearbox you need the sammy flywheel on there too
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Fwb's SJ410 Build
I have most of a g13a so have that already too just deciding which gearbox to use
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Fwb's SJ410 Build
I might be able to finally do some work on the truck again next week. Just finished moving house. Have moved all my tools built a workbench. Mounted the drill press and bench grinder and wired up some lights and powerpoints.
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Fwb's SJ410 Build
That's too tidy.....you need to get the 410 in there and make it look used 
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Fwb's SJ410 Build
The 410 is in there i standing on it. Just to make you all hellions I wasn't going to say but that's the workshop part I'm standing in a double garage on the front. And the pit is open and dry as a bone my g16a down there currently as we have a chain block
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Fwb's SJ410 Build
Finally managed to get some work done on the zuk. Passenger floor finally in and mostly welded into place.
Still thinking about chopping the rear end off and making it into a tubular rear
Still thinking about chopping the rear end off and making it into a tubular rear
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: Fwb's SJ410 Build
Started building my rocksliders today. Took a while to work out how I wanted to mount them. Going to weld them straight to the chassis going to be extremely strong but not too heavy
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Fwb's SJ410 Build
Take it you'll be bracing / reinforcing the chassis where they mount.Fwb2700 wrote:Started building my rocksliders today. Took a while to work out how I wanted to mount them. Going to weld them straight to the chassis going to be extremely strong but not too heavy
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
