Here's the pic for laughs
35s?
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
35s?
Just for a laugh while i was swapping out my wheels as sold ones I had on truck thought I would roll my flat mates simex not on a rim under the truck. Jacked the truck up will Hub was in center. 35s might actually of gone close too fitting. Would hit leafs though.
Here's the pic for laughs
Here's the pic for laughs
1984 Suzuki SJ410q Winch Truck (Work in Progress)
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: 35s?
I really like the look of those!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
Re: 35s?
Is yours a 410 or samurai? 410 spring spacing on samurai axles sorts the tyre clearance issues 
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: 35s?
Don't tell me that, Scottie! Don't make me want those tyres!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: 35s?
They aren't my tyres unfortunalty they are my flat mates just sat them there for a pic. They are 35/10.5/15simex extreme tyres. Mines a 410 and won't fit will hit the leafs.
1984 Suzuki SJ410q Winch Truck (Work in Progress)
Re: 35s?
If you fit samurai axles you can run large tyres without them hitting the leafs, my 33s have plenty of clearance on full lock with samurai axles on 410 spring spacing.
-
Fwb2700
- Engaged 4wd low
- Posts: 128
- Joined: Wed Oct 08, 2014 8:10 am
- Location: Palmerston North New Zealand
Re: 35s?
Yeah but samurai axles are extremely rare over here in Nz. I ultimately want to convert my sj to coil sprung on samurai axles. Run 33s or bigger with chromoly shafts etc. but don't know how practical it will be due to prices
1984 Suzuki SJ410q Winch Truck (Work in Progress)