It really is a great feeling first time they fire.
Progress will be taking a break for abit, my baby girl arrived on the 27th so she taking all my time.
Lwb Santana build
Re: Lwb Santana build
SJ413 LWB Santana 33s, 94",
Re: Lwb Santana build
Been a while since updated been making slow progress. But front clip is off for last time to finish welding.
SJ413 LWB Santana 33s, 94",
Re: Lwb Santana build
The lwb is starting to come together nicely. Front end is all welded and refitted to the car with a virtual lift to the top if the arch lines.
Refitted the headlights and grill. Finally got a grill emblem to.
Had to renew one headlight connector and change the ends on the side/Indicators as new ones didn't match
Need to figure out what this wire is next to passenger headlight. Seems to have had alot of heat at some time
(Found it, oil pressure switch)
Refitted the headlights and grill. Finally got a grill emblem to.
Had to renew one headlight connector and change the ends on the side/Indicators as new ones didn't match
Need to figure out what this wire is next to passenger headlight. Seems to have had alot of heat at some time
(Found it, oil pressure switch)
Last edited by Rankine on Sun Aug 04, 2024 10:23 pm, edited 1 time in total.
SJ413 LWB Santana 33s, 94",
Re: Lwb Santana build
With the front end all fitted back in place I could finish fitting the winch solenoid and dash controls from the old car. On the previous I had the isolator for the winch under the bonnet and just a switch interrupting the power to the toggle inside.
This time I decided to have the isolator inside the cab on the dash. Plan to use this to feed a second fuse board further down the line for other offroad accessories.
Also left plenty of space on the new switch panel for this also.
This time I decided to have the isolator inside the cab on the dash. Plan to use this to feed a second fuse board further down the line for other offroad accessories.
Also left plenty of space on the new switch panel for this also.
SJ413 LWB Santana 33s, 94",
Re: Lwb Santana build
Still slowly picking away at jobs on this. Focus lately has been getting it running again. Got my su manifold from rockwatt fitted. Made up a intake turned it over and the float chamber is leaking.
Hadn't opened the hif44 up to check my needle and spring but since I was ordering a new seal.figured was a good time.
Found I already have a bdl needle but with a yellow spring. So new red spring and seals should arrive tomorrow.
Hadn't opened the hif44 up to check my needle and spring but since I was ordering a new seal.figured was a good time.
Found I already have a bdl needle but with a yellow spring. So new red spring and seals should arrive tomorrow.
SJ413 LWB Santana 33s, 94",
Re: Lwb Santana build
Cheers Scottie, parts arrived today so hopefully bit of progress by next week
SJ413 LWB Santana 33s, 94",
- d_r_1989
- Winching along now
- Posts: 523
- Joined: Tue Jul 08, 2014 1:49 pm
- Location: Halifax west Yorkshire
Re: Lwb Santana build
Looking really good, can't wait to see it finished and all your hard work paid off