millers tonka toy

[ScottieJ]

It's coming along nicely, I like the way a little bit is getting painted at a time, guess you haven't got enough time or space to do it all in one go.

[mayhemmiller]

i would love to do it all in one go but yeah time will not allow and the fact that it's a gaint moblie tool box that i need to use for work so it has to be ready come monday morning

[mayhemmiller]

time for an update as it's been a while

painting was going well untill i got ill and then work got busy but have finnaly found some time to do some work

just got rear door left to paint

getting there

P3100042.JPG (257.58 KiB) Viewed 6253 times

and then it all started going down hill was on the way into town when at a roundabout it wouldn't go into gear luckaly it was down hill rolled it off the roundabout

after a tow home and some further investigating broken clutch and clutch arm so engine out

P3040003.JPG (299.13 KiB) Viewed 6253 times

whlst the engine was out i replaced the head and other gaskets and gave the engine and gearbox a good clean

clean

P3090010.JPG (232.81 KiB) Viewed 6253 times

clutch fitted just waitng for clutch arm to arrive to fit and test

[mayhemmiller]

so back door painted and refitted, wheel carrier painted red

clutch arm fitted and working clutch bitting point is now really high

fitted new roter arm distributor cap and ht leads and spark plugs

gave her an oil change

now ready for a trip back to the uk on thursday

pics to follow soon

[Russ24]

black and red.

that looks good. and more importantly, it looks like you have a good time putting it together

well done. like it

[mayhemmiller]

made it to the uk and back 900 miles clocked i think i need a new a**e as mine has healed over

passed it's mot

only needed a little work

2 spots of welding on the rear wheel arch
a spot of welding on the passenger seat mounts
welding on the exhast

head light aimming in the wrong direction (turns out was due to having a french bulb in it)

horn not working ( a lose wire )

front passenger brakes binding causeing brakes to be inballenced

but apart from that all good

[mayhemmiller]

well finally managed to find some time in workshop time today and got a few bits done

changed out my 2" shackles for the standard ones (i now have some 2" tarantula lift shackles for sale)

P6120158.JPG (79.24 KiB) Viewed 6179 times

P6120160.JPG (78.78 KiB) Viewed 6179 times

whilst i had the shackles off i replaced the poly bushes that came out quite easily

Click Here for Youtube Video


is that normal


whilst i had it over the pit i re-tightened the bolts on the sump, checked diff oil levels greased all the props and u joints
drained and flushed the fuel tank and cleaned the filter

P6120162.JPG (73.87 KiB) Viewed 6179 times

some of the crap that came out off both

reconnected the retaining clip on the t box lever that had popped out whilst off roading a few weeks ago (that was a bit sacrey)

sorted out the ideal speed as it was a bit fast

[mayhemmiller]

had some workshop time to day gotta love wet weather (only sometimes)

stripped out the inside seats carpets etc

IMG_0008.JPG (499.37 KiB) Viewed 6142 times

gave it a good wash out took the bungs out of the front and put a hose pipe in the back
then set about rubbing it all down with wet and dry

then resprayed the inside black to match

IMG_0012.JPG (426.02 KiB) Viewed 6142 times

IMG_0016.JPG (467.16 KiB) Viewed 6142 times