Fourtrak engine

Engine not running right? see if we can help you!
Post Reply
Rooge
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Feb 11, 2012 12:55 pm

Fourtrak engine

Post by Rooge » Tue Mar 27, 2012 7:52 am

Has any 1 seen a Fourtrak engine in an sj? I can get hold of a 2.8 turbo lump cheap and thinking about wedging it in. Been told that there big heavy lumps but wouldn't the power you get from it outweigh the cons of the heaviness? Or would it just nose dive everywhere and be useless?
I know you can buy the kits for vw etc but apparently the starter motors and alternators are pretty bullet proof on these when it comes to deep muddy water which is where my sj always is!
Just thought whilst I've got the engine and box out its the perfect time to swap lumps,
Any ideas/help would be fab :thumbup:

User avatar
ScottieJ
The Boss
The Boss
Posts: 11635
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Fourtrak engine

Post by ScottieJ » Tue Mar 27, 2012 10:11 am

My 2p

Although they are a good engine, in an SJ I wouldn't bother, far to heavy! the lightness is the SJs main advantage so its best to keep it that way IMO.
Zuki Build

Steady as she goes!

User avatar
Highlander
Can I have a tow
Can I have a tow
Posts: 350
Joined: Thu Sep 08, 2011 12:19 pm
Location: Kilmarnock

Re: Fourtrak engine

Post by Highlander » Tue Mar 27, 2012 10:30 am

Rooge wrote:when it comes to deep muddy water which is where my sj always is!
It'll make a great anchor! :lol:

Yeah it will be very heavy and change the SJ quite dramatically

I'm sure it could be done but I can't think of ever seeing it done so there's probably a good reason not to. :D

Saying that, I've seen a V8 Samurai but it had some serious mods done to it (it looked like a Samurai but that was about it)

If you fancy it, go for it and lets see the pics! :D
Image

Rooge
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Feb 11, 2012 12:55 pm

Re: Fourtrak engine

Post by Rooge » Tue Mar 27, 2012 12:22 pm

Maybe I'll stick to a derv pug engine then, I can swap my vit lump for a 1.9 pug derv off a friend so it's not too bad, where's the cheapest place to get the adaptor plate from? is there enough room to get a turbo 1.9 in them or is a bit too much of a squeeze?
Cheers

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Fourtrak engine

Post by ROBBIE » Tue Mar 27, 2012 8:42 pm

try these http://www.acmeadapters.com
try a suzuki dealer for a proper bell housing, or rhino ray for 1 of his.
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

Rooge
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Feb 11, 2012 12:55 pm

Re: Fourtrak engine

Post by Rooge » Wed Mar 28, 2012 7:36 am

Cool cheers bud

Post Reply