Full Float Axle

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Full Float Axle

Post by ferris » Wed Nov 14, 2012 10:45 pm

Thanks for that Scott :thumbup: . I'll make some enquiries about getting some 413 shafts made. If its going to cost loads more i'l just go with the sammy axle, a inch and a half each side is not going to be very noticable.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
mike harris
SCUK is my life
SCUK is my life
Posts: 1828
Joined: Sat Jan 08, 2011 8:30 pm
Location: hascombe Surrey

Re: Full Float Axle

Post by mike harris » Sat Nov 17, 2012 7:55 am

I am having fully floating axles made for my Suzuki by rock watt :)

I doubt you will be able to get hold of Rs mfg !! But his stuff is very good.

Mike
Top
dannytrigger
Got muddy boots
Got muddy boots
Posts: 96
Joined: Thu Jan 31, 2013 8:56 pm
Location: cheltenham

Re: Full Float Axle

Post by dannytrigger » Fri Mar 08, 2013 2:55 pm

Had mine deliverd today from rs mfg to be fair to him i orderd and they arrrived two days later even called me up to say thanks for the order. kit looks well made aswell
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Full Float Axle

Post by andyrew » Sat Mar 09, 2013 11:02 am

dannytrigger wrote:Had mine deliverd today from rs mfg to be fair to him i orderd and they arrrived two days later even called me up to say thanks for the order. kit looks well made aswell
Can I ask, how much the kit cost?
Andys Rusty Suzuki Emporium
Top
dannytrigger
Got muddy boots
Got muddy boots
Posts: 96
Joined: Thu Jan 31, 2013 8:56 pm
Location: cheltenham

Re: Full Float Axle

Post by dannytrigger » Sat Mar 09, 2013 11:49 am

£250 inc vat and postage. but they do look vry well made i will run them a few times and see how i get on then post on here if that helps?
Top
User avatar
chazz_543
Got muddy boots
Got muddy boots
Posts: 15
Joined: Mon Sep 12, 2011 1:52 pm
Location: Essex, Southend on sea

Re: Full Float Axle

Post by chazz_543 » Sat Mar 09, 2013 5:28 pm

I have also just ordered fully floating rear, 26 spline front shafts and CV's, two diff lockers, high stearing kit, solid diff spacers and transfer box guard. Haveing to wait for the fronts to be made but will be worth it. Looks like quality products. I will do a build thread when I reseve all the bits. Cant wait.
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Full Float Axle

Post by Jordi » Sun Mar 10, 2013 7:54 pm

chazz_543 wrote:I have also just ordered fully floating rear, 26 spline front shafts and CV's, two diff lockers, high stearing kit, solid diff spacers and transfer box guard. Haveing to wait for the fronts to be made but will be worth it. Looks like quality products. I will do a build thread when I reseve all the bits. Cant wait.
Bet that was an expensive shop.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
chazz_543
Got muddy boots
Got muddy boots
Posts: 15
Joined: Mon Sep 12, 2011 1:52 pm
Location: Essex, Southend on sea

Re: Full Float Axle

Post by chazz_543 » Sun Mar 10, 2013 10:05 pm

Bet that was an expensive shop.[/quote]

It wasnt cheap but I do think fairly priced. Just cant wait to get building now got all the parts ready, its going to be one hell of a truck. :thumbup:
Top
Post Reply

Return to “SJ series Transmission, Axles, Brakes, wheels and tyres.”