Lets get the ball rolling !!

OllieSJ · Post by **OllieSJ** » Fri Apr 19, 2013 7:11 pm

Here is my Suzuki sj413 nice little anus. Previous owner did some work to it before passing it on to me. I have decided to do this mainly down to jordi , Scottie and the others giving me a kick to get it going so here goes.

First day ever buying anything expensive to do with cars was the clutch, spoke to Mr Dean he showed me a nice one on flee bay on up side if its crap is that i will have to change it again and get the experience. This isnt the best time to be starting a build as got exams just round the corner but you only live once.

few facts about her :

B reg
1.3 everything standard
the auto choke doesnt work as normal
Had some welding done before in the rear and other places isnt to bad according to my dad.
just need a new wing on the passanger side as i think its safe to say its dead as when you open the door the panal flexes.
my 4th sj so 4th time lucky.

OllieSJ · Post by **OllieSJ** » Fri Apr 19, 2013 7:15 pm

Got loads of parts that will be fitted once i get going and stop wimping out about seeing the sj in bits.
Mainly want the car to be solid ish then get it into a paint shop to get a few bits totched up here and there.

Post by **Jordi** » Fri Apr 19, 2013 10:25 pm

Who is christopher dean?

turbo-tom · Post by **turbo-tom** » Fri Apr 19, 2013 10:26 pm

Jordi wrote:Who is christopher dean?

Twiss who i jumped in with at Billing mate

Post by **Jordi** » Fri Apr 19, 2013 10:31 pm

Ahhh, i did ask him his real name, he just said Chris.

Makes sense now. Canny chap too! Was great how he had all the bits i had forgotten to ask for or broke when i swapped that t/box.

Not too sure about his hair style though.

He'll keep you right Ollie.

OllieSJ · Post by **OllieSJ** » Fri Apr 19, 2013 10:45 pm

ahahha good good

Post by **Jordi** » Sat Apr 20, 2013 5:44 pm

Is Twiss round this weekend Ollie?

How we doing with that clutch?

OllieSJ · Post by **OllieSJ** » Sat Apr 20, 2013 5:50 pm

Very productive 5 hours with Twiss. Nice to see another sj and a 1.6 with double cherry very nice. Basicly we went though all the mot stuff. But as soon as he turned up the F*cker didnt want to start so out came the start motor then back in bash bash bash got it going. Checked everything else best moment was when he said 'ahh this isnt too bad bit of work and it would get through an mot' until he looked at the passanger wing then wilst nabbing a few parts off the other sj , we decide to swap the passanger wings round. So i dont think this will be a very long project and most of it will involve twiss

Thanks mate

Post by **Jordi** » Sat Apr 20, 2013 5:58 pm

Well Done

I'm well impressed Ollie!

Sounds likes it's been a productive day for you. As for Twiss' Zuk, not a straight panel on it but it sounds mental!

It will be a long project. Cos' you'll get it MOT'd and road legal. Run it a bit, then think i'll change this, swap that. Then it'll be 10 years later and you'll still be modding this and swapping that.

OllieSJ · Post by **OllieSJ** » Sat Apr 20, 2013 6:02 pm

yer that will probably happen i think the little 410 is going to be a parts car now and jordi i think my suzuki will be like yours but think i will get mine painted quicker.

Suzuki Club UK

Lets get the ball rolling !!

Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

Re: Lets get the ball rolling !!

test