Hi folks new to the forum!, just got a Suzuki samurai 413 in white and currently getting it ready for the road have hit a problem though! There are no mounts on my car to attach the front bumper too, where they should be (according to the Haynes manual) is on either end of the bar running along the front end of the car below the grille. Are these parts detachable or has someone prior to me cut them off? My dad has loads of Samurai's, but not one of them have these brackets, any help from anyone would be greatly appreciated.
Andrew
Samurai Bumper mounts ?
Samurai Bumper mounts ?
- Attachments
-
- image.jpg (2.07 MiB) Viewed 6624 times
-
dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Samurai Bumper mounts ?
Welcome to scuk
They have cut them off
I'll try and find a pic
They have cut them off
I'll try and find a pic
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Re: Samurai Bumper mounts ?
Aww bugger knew it! Looks like the welder will have to be out! Thank you very much
-
dazerede
- Suzuki, will you marry me?
- Posts: 2141
- Joined: Fri Sep 30, 2011 10:23 pm
- Location: cornwall callington
Re: Samurai Bumper mounts ?
There should be these things on the end of the bar each end
http://item.mobileweb.ebay.co.uk/viewit ... 1250185554
http://item.mobileweb.ebay.co.uk/viewit ... 1250185554
Suzuki Sj 410 Jap Built
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Recaro Seats Fitted
Landini Blue Colour
Full rollcage and winch bumper
1.6 8v vitara lump with su carb
4” calmini lift kit
235/75/15 insa turbo special tracks
99.9% Rust Free
BUILT NOT BOUGHT
Re: Samurai Bumper mounts ?
Thank you very much
-
Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Samurai Bumper mounts ?
Its the 1st and easiet mod a lot of people do to fit bigger tyres.
Probably easier just to mount some lights on the grill and cut them off completely.
Probably easier just to mount some lights on the grill and cut them off completely.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Samurai Bumper mounts ?
If you want a standard bumper for asthetic reasons you will have to weld some new mounts back on.
If not I would just do as Jordi says and cut the bar right back to the chassis rail and leave it at that.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
Highlander
- Can I have a tow
- Posts: 350
- Joined: Thu Sep 08, 2011 12:19 pm
- Location: Kilmarnock
Re: Samurai Bumper mounts ?
Welcome, nice looking motor, looks a bit like one of mine 
Looks like you got a bargain there!
http://forum.suzukiclubuk.co.uk/vi ... 071#p28071
Looks like you got a bargain there!
http://forum.suzukiclubuk.co.uk/vi ... 071#p28071
