Anton's build

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Anton's build

Post by Anton » Sat Aug 03, 2013 4:50 pm

Today:

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Fits just lovely, but the caliper mount is 12mm too far back (knew that would be the case when I made it), and I've had to space out things with a 10mm wide nut and a couple of washers. I've ordered some 12mm bar (hopefully it'll actually be 12mm!) to make spacers out of.

Also need 38mm bolts, so I've ordered those, and a new set of flexi hoses from Llama 4x4. So I still have to make brake pipe clip thingies, the spacer blocks/shims/whatever you want to call 'em, but then it'll be time to fit everything and bleed the brakes!

Getting closer to a working SJ! Yippee and stuff! :lol:

Oh, and yes, before anyone points out about the tyre - yes I know. It's for the other side, sue me - I was checking clearance!
Last edited by Anton on Sun Jul 16, 2017 7:25 pm, edited 3 times in total.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
turbo-tom
I spend far too much time on here
I spend far too much time on here
Posts: 4478
Joined: Fri Jun 25, 2010 9:29 pm
Location: West Sussex

Re: Anton's build

Post by turbo-tom » Sat Aug 03, 2013 4:54 pm

Looks like you have made real progress mate. If I was you where you have bolted the new caliper carrier on I would be tempted to slowly weld around it aswell to give it more strength. If you was to do it take time otherwise you might damage the axle casing. Other then that its looking realky good. :thumbup:
Tom :)

Ford Fiesta ST :D
Top
User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:
Contact Ladaman

Re: Anton's build

Post by Ladaman » Sat Aug 03, 2013 5:49 pm

Some nice bits going on there. :thumbup:

It won't be long before you're wheelin' again.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Anton's build

Post by Anton » Sat Aug 03, 2013 6:34 pm

turbo-tom wrote:Looks like you have made real progress mate. If I was you where you have bolted the new caliper carrier on I would be tempted to slowly weld around it aswell to give it more strength. If you was to do it take time otherwise you might damage the axle casing. Other then that its looking realky good. :thumbup:
It's a bit over-engineered, actually - 10mm plate was probably a bit too thick!

Still, it's never, ever, *ever* going to bend, and I like that. I don't know that I need to weld it on though - the bolts should be enough, surely?
Ladaman wrote:Some nice bits going on there. :thumbup:

It won't be long before you're wheelin' again.
I really hope so!!!


Click Here for Youtube Video

1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
donkeychomp
I spend far too much time on here
I spend far too much time on here
Posts: 3582
Joined: Thu Aug 18, 2011 3:49 pm
Location: Shepperton, Middx

Re: Anton's build

Post by donkeychomp » Sat Aug 03, 2013 10:26 pm

Nice work there Anton...can't beat a bit of home made stuff!
If it ticks over...leave it
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Anton's build

Post by Anton » Wed Aug 07, 2013 1:31 pm

MOT booked for next Wednesday (earliest I could get!). Fingers crossed, lads!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Anton's build

Post by Jordi » Wed Aug 07, 2013 2:13 pm

Real nice work on the caliper mounts Anton.

Its all looking spot on!
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Anton's build

Post by Anton » Wed Aug 07, 2013 2:27 pm

Let's just hope that she passes!

Tomorrow I will sort out the rest of the rear lights. I have a new rear exhaust section coming, bolt that up, and then just finish the brakes, and I'm ready to MOT...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Anton's build

Post by Anton » Thu Aug 08, 2013 4:20 pm

Image

Image

Image

12mm plate used to make the "spacer" nuggets, welded top and side, then ground back, before being spraypainted.

I think they look alright! Jobs left for the brakes:

Make "forks" to hold the brake lines in place, get the flexi installed (waiting on Dave from Llama 4x4) then bleed the brakes.

Got a new exhaust back section in the post. I'm just going to bolt that up when it comes - none of this making a new one out of bits lying around, I just don't have the time/energy/patience! ;)

Then it's down to the rear lights being finished, and hoping that I haven't missed anything!

Getting close to finishing!

MOT next wednesday. Erk!
Last edited by Anton on Sun Jul 16, 2017 7:31 pm, edited 2 times in total.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Anton's build

Post by Jordi » Thu Aug 08, 2013 9:46 pm

I'm with you on th exhaust Anton. Its one of the very few jobs i had done "professionaly". Luckily its turned out ok both times.

The original was good but because of the way i spec'd it it could be supported properly and eventually ripped itself apart. Re-done now with the *silencer* under he car so the weight is distributed better and should last another good few years.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
Post Reply

Return to “Builds and Projects”