vitara td brakes hard?

All tech relating to the Suzuki Vitara that won't relate to any other models, Front IFS etc.
Post Reply
fatdaz
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Jan 07, 2013 1:19 pm
Location: rugeley - staffordshire

vitara td brakes hard?

Post by fatdaz » Wed Jan 29, 2014 1:57 pm

Brake pedals hard to press. (Vit diesel commercial) could it be servo? Anyone know if there the same as petrols or where I can get one from?
2001 commercial td
Thanks in advance
2 samurais. 1 vit and now a vit commercial :)
Top
fatdaz
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Jan 07, 2013 1:19 pm
Location: rugeley - staffordshire

Re: vitara td brakes hard?

Post by fatdaz » Thu Jan 30, 2014 1:43 pm

the hose that connect at the servo when unplugged is sucking?
also for the first few times i pressed the brakes again after reconnecting that hose on the servo they felt right, as i pulled off to take it for a spin to check they went hard again the nexttime i pressed and continue to stay hard.
2 samurais. 1 vit and now a vit commercial :)
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: vitara td brakes hard?

Post by dan_2k_uk » Thu Jan 30, 2014 5:34 pm

Strange. Its should be sucking. I don't know anything about how servos work but it sounds like something inside is pulling over that hose connection and staying there. Once you take the hose off it let's it move away again until the first operation of the pedal again.

No help I'm sure but that's my full knowledge exhausted.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:
Contact twiss

Re: vitara td brakes hard?

Post by twiss » Sat Feb 01, 2014 10:53 am

maybe this might help?

http://www.roadkillcustoms.com/hot-rods ... z2s4Bo0UH5

although im not sure if it will have a check valve or not?
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."
Top
fatdaz
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Jan 07, 2013 1:19 pm
Location: rugeley - staffordshire

Re: vitara td brakes hard?

Post by fatdaz » Thu Mar 20, 2014 9:53 am

just and update, turned out to be a broken plastic joint for the vacuum pipes. bypassed it for now but it does have a plug going into the bottom of it, what is it?

(at least i know have a spare vacuum pump - 205 diesel local scrappy £20! :) )

can anyone tell me about the servo on the td? is it the same as anything else? id like to get one for the spares box! :)

Image
2 samurais. 1 vit and now a vit commercial :)
Top
User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2989
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:
Contact Darrell

Re: vitara td brakes hard?

Post by Darrell » Thu Mar 20, 2014 9:27 pm

I would assume that's the solenoid valve controling the egr valve.
Attachments
vit egr.jpg
vit egr.jpg (159.31 KiB) Viewed 5743 times
2005-GV 1600se, "Hell" What do I know!
Top
fatdaz
Got muddy boots
Got muddy boots
Posts: 28
Joined: Mon Jan 07, 2013 1:19 pm
Location: rugeley - staffordshire

Re: vitara td brakes hard?

Post by fatdaz » Fri Mar 28, 2014 1:11 pm

cheers dude, will look into it :)
2 samurais. 1 vit and now a vit commercial :)
Top
Post Reply

Return to “Vitara Specific Tech”