1987 Samurai half shaft bearings!

[littlesammy]

Are they actually called half shaft bearings as ive been all over flea bay and all i can find is wheel bearings.,?
cheers
liam

[dan_2k_uk]

They are wheel bearings

[Ladaman]

Half way down the first page of this link are the bearing and seal details.

http://forum.suzukiclubuk.co.uk/vi ... =12&t=2801

The bearings are 6207, but there are other bits needed also, seal retainer etc... There are loads of bearings on eBay

[littlesammy]

Half way down the first page of this link are the bearing and seal details.

http://forum.suzukiclubuk.co.uk/vi ... =12&t=2801

The bearings are 6207, but there are other bits needed also, seal retainer etc... There are loads of bearings on eBay

thanks mate.,ill get what details i need from that and order a kit !

thanks

liam

[littlesammy]

They are wheel bearings

as if i wasn't confused enough , lol !

[ScottieJ]

Go on www.muddyzook.com for bearing kits

[littlesammy]

Doh ! hello gents, where do i get the square retaining plate as mine seems to be slightly oval.!! and whilst im in full retard mode , does the spacer supplied with my bearing go on first.,? i can't tell because what was left of the old bearing is half way down the axle in a million bits.!
luckily none of it was in the diff !

cheers
liam

[ScottieJ]

Muddyzook sell heavy duty bearing retainers, also sell split ones making bearing changes even easier.

The thin 4mm spacer goes on first, taper to the wheel end of the shaft, then bearing then locking collar.

[littlesammy]

Muddyzook sell heavy duty bearing retainers, also sell split ones making bearing changes even easier.

The thin 4mm spacer goes on first, taper to the wheel end of the shaft, then bearing then locking collar.

cheers mate.,i just bought the plates from muddyzook.

thanks for you help., its much appreciated., that apples to everyone.!