Transfer box handbrake info.

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
screeminsj
Got muddy boots
Got muddy boots
Posts: 6
Joined: Sat Oct 27, 2012 3:11 pm

Re: Transfer box handbrake info.

Post by screeminsj » Mon Sep 15, 2014 6:49 pm

Hi guys does anybody know the part numbers of the transmission brake shoes? thanks

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Transfer box handbrake info.

Post by Darrell » Mon Sep 15, 2014 11:04 pm

Done this.......
Spanish ones appear as rare as rocking horse shit :D (you can get them relined)

http://www.offroadingpics.co.uk/apps/ph ... =195348689
2005-GV 1600se, "Hell" What do I know!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Transfer box handbrake info.

Post by ROBBIE » Tue Sep 16, 2014 8:48 am

Rhino Ray does them, cant remember how much
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

screeminsj
Got muddy boots
Got muddy boots
Posts: 6
Joined: Sat Oct 27, 2012 3:11 pm

Re: Transfer box handbrake info.

Post by screeminsj » Tue Sep 16, 2014 2:56 pm

thanks for your help

User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 878
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Transfer box handbrake info.

Post by kiwizook » Mon May 09, 2016 10:22 am

Hi, anyone know what size the prop flange nut is? I need to reorder these nuts, as I busted them, but I'm 18.500 km away from home, so obviously cant measure them, I think they are m20x1.5, but would like confirmation
It's not a question of how much you spend on your suzuki, but when your money will run out

User avatar
stevepsj413
Engaged 4wd low
Engaged 4wd low
Posts: 193
Joined: Fri May 31, 2013 10:58 pm

Re: Transfer box handbrake info.

Post by stevepsj413 » Mon May 09, 2016 3:36 pm

kiwizook wrote:Hi, anyone know what size the prop flange nut is? I need to reorder these nuts, as I busted them, but I'm 18.500 km away from home, so obviously cant measure them, I think they are m20x1.5, but would like confirmation
Just checked one in my garage, your right M20x1.5.

Marilyn
Got muddy boots
Got muddy boots
Posts: 48
Joined: Tue Oct 06, 2020 7:55 pm

Re: Transfer box handbrake info.

Post by Marilyn » Wed Jan 27, 2021 12:25 pm

Group. I'm looking for a set of brake shoes for the sj410 Spanish built centre drumbrake handbrake .I understand it's 180 dia. Any aftermarket part numbers and suppliers known please.

border
Engaged 4wd low
Engaged 4wd low
Posts: 184
Joined: Sat Sep 19, 2020 12:03 am

Re: Transfer box handbrake info.

Post by border » Thu Jan 28, 2021 9:49 am

Marilyn wrote:
Wed Jan 27, 2021 12:25 pm
Group. I'm looking for a set of brake shoes for the sj410 Spanish built centre drumbrake handbrake .I understand it's 180 dia. Any aftermarket part numbers and suppliers known please.
Done mine not long ago. I used this part number 54710-73040 at my local motor factors, they are 180 diameter.
hope this helps.

Marilyn
Got muddy boots
Got muddy boots
Posts: 48
Joined: Tue Oct 06, 2020 7:55 pm

Re: Transfer box handbrake info.

Post by Marilyn » Thu Jan 28, 2021 6:08 pm

Great thanks.This was the part referenced in the parts list online but was not sure if still available .

Marilyn
Got muddy boots
Got muddy boots
Posts: 48
Joined: Tue Oct 06, 2020 7:55 pm

Re: Transfer box handbrake info.

Post by Marilyn » Fri Jan 29, 2021 4:25 pm

Group .has anyone used sazuki early Alte rear brake shoes to fit the SJ410 Santana transmission handbrake brake shoes. ( 180mm which may need some small mods to fit springs

Post Reply