Re: SJ413 Clutch fitment
Posted: Wed Apr 23, 2014 5:33 pm
Just checked. It does indeed have 18 teeth. So its wrong cluch in the box
Page 2 of 2
Re: SJ413 Clutch fitment
Posted: Wed Apr 23, 2014 8:03 pm
At least you know what the problem is now.
Re: SJ413 Clutch fitment
Posted: Wed Apr 23, 2014 10:21 pm
Cheers guys.
Spoke to my pal who is the supplier. He's getting it changed over tomorrow. Then hopefully I can get this SJ back together.
Spoke to my pal who is the supplier. He's getting it changed over tomorrow. Then hopefully I can get this SJ back together.
Re: SJ413 Clutch fitment
Posted: Wed Apr 23, 2014 10:50 pm
Have you sussed out the bearing size issue ??
Seams the pilot shaft size is 10mm on the 413 and the later 410.
Seams the pilot shaft size is 10mm on the 413 and the later 410.
Re: SJ413 Clutch fitment
Posted: Thu Apr 24, 2014 9:54 am
Yup, seems to me that you've been sold a 410 kit. What diameter is the clutch plate, out of interest?
This is what mine looked like before going in:
20 spline with 190mm pressure plate.
If yours is 180mm with 18 splines, it's for a 410 (I think).
This is what mine looked like before going in:
20 spline with 190mm pressure plate.
If yours is 180mm with 18 splines, it's for a 410 (I think).
Re: SJ413 Clutch fitment
Posted: Thu Apr 24, 2014 11:24 am
Speaking of 410 clutch anyone want one? Free to collector but no thrust bearing
Re: SJ413 Clutch fitment
Posted: Thu Apr 24, 2014 7:40 pm
Its a clutch that has been returned by a garage somewhere with the wrong plate. Its actually a valeo drive plate. Haha. Probably for a peugeot or something.