Re: kentish newbie?
Posted: Tue Feb 05, 2013 6:34 pm
Looks tidy enough 
But we are not all gents 
Sj410 soft top 1987
Page 2 of 2
Re: kentish newbie?
Posted: Wed Feb 06, 2013 9:48 pm
But we are not all gents Sj410 soft top 1987
Re: kentish newbie?
Posted: Wed Feb 06, 2013 10:37 pm
Has this god body lift
Re: kentish newbie?
Posted: Wed Feb 06, 2013 10:42 pm
Yeah looks like between 2 and 3 inch.dazerede wrote:Has this god body lift
Re: kentish newbie?
Posted: Thu Feb 07, 2013 6:47 pm
sorry bigkid !? and ladies.... yep it had a 50mm lift when i got it and i thought it would be good/cheap to put some shackles on it... bad idea, after a death wobble they came off! its now running add a leafs which are not much better its ride is hard as nails and my tired leafs are going w shaped? hopefully my yam r1 will sell soon which will fund the rest of the build? been looking at 2.5" flexy lift springs was also thinking about doing a reverse shackle on the front to run rear springs on the front, we will have to see how much my bike goes for..
scottie im in the med in kent.... medway? but you dont want the 1.3 as its fooked idont think its a gti was told its a swift due to the oil filler being a screw not a wing cap and i need the sump and oil pick up??
scottie im in the med in kent.... medway? but you dont want the 1.3 as its fooked idont think its a gti was told its a swift due to the oil filler being a screw not a wing cap and i need the sump and oil pick up??
Re: kentish newbie?
Posted: Thu Feb 07, 2013 10:36 pm
An R1? No wonder you got a anus...much safer (and slower 
).
Had a go on a mates R6 and scared the crap out of myself!
Oh and welcome to the club!!
).Had a go on a mates R6 and scared the crap out of myself!
Oh and welcome to the club!!
Re: kentish newbie?
Posted: Fri Feb 08, 2013 9:15 am
Personally on the short wheel base SJs I'm not a fan of shackle reverse, It also gives you less clearance for large tyres because when the spring compresses the tyre tyre will move towards the bulkhead, with the shackle up front it moves away from it giving you more clearance.
If it does I'd still be interested minus all the bits you need as it would get a full rebuild and go in my long wheel base
but of course that's only if you want to part with it. I'm actually driving past your way tomorrow, My father and I are driving over to Ramsgate to pick up another Long wheel base.
If it's a GTI it'll look like this.mr.lers wrote: scottie im in the med in kent.... medway? but you dont want the 1.3 as its fooked idont think its a gti was told its a swift due to the oil filler being a screw not a wing cap and i need the sump and oil pick up??
If it does I'd still be interested minus all the bits you need as it would get a full rebuild and go in my long wheel base
but of course that's only if you want to part with it. I'm actually driving past your way tomorrow, My father and I are driving over to Ramsgate to pick up another Long wheel base.Re: kentish newbie?
Posted: Sat Feb 09, 2013 3:18 pm
Sorry Scottie but its only an 8v single cam looks to me like a 413 lump 1324cc but was told at my local zuke breaker after losing the oil cap that a 413 has a wing cap mine is a screw bloke there said its probably a old swift engine?
Re: kentish newbie?
Posted: Sat Feb 09, 2013 3:27 pm
Cool not a problem, had to check though as I've been toying with a swift gti lump in my Lwb