Kermes-Vermilio's Vitara

[Kermes-vermilio]

OK, thought I would start a "project" thread for my Vitara.
It's a MY2000 1.6 8v, SWB, hard top. My aim is to be able to use it as a daily hack (55 mile round trip to work and back 5 days a week) and to have some fun in the mud on the odd occasion.

It came with a 2" lift, pro comp rear shocks, insa turbo sahara tyres, a good solid chassis and some rot on the body.

Pics of how I got it:

IMG_2762.jpg (341.95 KiB) Viewed 9035 times

IMG_2761.jpg (383.85 KiB) Viewed 9035 times

IMG_2867.jpg (304.94 KiB) Viewed 9035 times

IMG_2868.jpg (284.81 KiB) Viewed 9035 times

[Kermes-vermilio]

First jobs were to change the cam belt (no history with the Vit so didn't know when it was last done) and urgently change the discs and pads:

IMG_2797.jpg (232.82 KiB) Viewed 9034 times

IMG_2798.jpg (239.61 KiB) Viewed 9034 times

IMG_2799.jpg (241.32 KiB) Viewed 9034 times

IMG_2800.jpg (331.6 KiB) Viewed 9034 times

And pick up the missing arch trim

IMG_3084.jpg (358.67 KiB) Viewed 9034 times

Oh, and fit some spot lamps, every 4x4 needs them

IMG_3061.jpg (287.96 KiB) Viewed 9034 times

[Kermes-vermilio]

Next on the agenda was correcting (or at least adjusting) the camber, with a set of camber bolts.
The front wheels were sat like this ----->

After fitting camber bolts:

IMG_0042.jpg (216.88 KiB) Viewed 9032 times

Doing that made it feel much more planted and stable on the road.

Next up, attack the rot!
Disclaimer: I do not profess to be any good at welding. I do what I have to do and if it looks pretty its probably a mistake or just good luck!

IMG_0105.jpg (367.86 KiB) Viewed 9032 times

IMG_0124.jpg (456.11 KiB) Viewed 9032 times

IMG_0115.jpg (431.49 KiB) Viewed 9032 times

[Kermes-vermilio]

Cut it out:

IMG_0122.jpg (466.76 KiB) Viewed 9030 times

IMG_0175.jpg (427.3 KiB) Viewed 9030 times

Plate it up:

IMG_0171.jpg (475.61 KiB) Viewed 9030 times

IMG_0176.jpg (439.5 KiB) Viewed 9030 times

Add a lick of paint:

IMG_0225.jpg (550.83 KiB) Viewed 9030 times

Bosh!

[Kermes-vermilio]

I then pulled all the wiring back into the back of the truck (the passenger side wiring ran on the outside, behind the bumper) and extended it so it runs internally. Moved the fog light and the number plate and lights onto the back door, and painted the back door, oh and picked up a spare wheel carrier:

IMG_0076.jpg (342.18 KiB) Viewed 9029 times

IMG_0101.jpg (380.55 KiB) Viewed 9029 times

IMG_0052.jpg (248.24 KiB) Viewed 9029 times

Seeing as the support bar for the bumper was all rotten, I carefully crafted (bodged) the back bumper from a anus onto the back:

IMG_0228.jpg (484.77 KiB) Viewed 9029 times

[Kermes-vermilio]

The next body repair will be around the spoiler, here is a preview of that:

IMG_0092.jpg (313.69 KiB) Viewed 9028 times

IMG_0095.jpg (312.21 KiB) Viewed 9028 times

There is a bit more just above where the back window is, so basically going to have to cut a section of the back roof and patch it up. Maybe when the weather warms up a bit lol.
I will slowly work forward, that is probably the worst of it to be fair.

Future things I will do are:
- Change the gearbox - it's chattery and I am not sure if it is getting worse or not, but I think it needs to be done!
- Finish body repairs
- Paint it battleship grey as I work on the repairs
- source or have built some heavy duty bumpers (and possibly a winch? maybe? are the necessary?)
- source and fit back seats and seatbelts as they are missing. I have the back seats, but no brackets or bolts
- have lots of fun in it

[ROBBIE]

Good work bud

[Ladaman]

Looking good.

I'm sure you will have lots of fun with it.

[Rhinoman]

Mine was a similar spec originally, I did 80 miles a day commuting, drove it to Tong and Salisbury Plain a few times and did the Sweden Off Road tour in it. It was very capable but still very usable.

[Anton]

Love a good build thread! Keep it up mate. That's a great looking little truck.