Project Bodge

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Fri Apr 17, 2015 5:33 pm

Welded the diff gaurds on earlier, also got myself a full float convesion for the back. Just need a few more bits and bobs and i can fit them on the SJ 8-)

Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Project Bodge

Post by Anton » Fri Apr 17, 2015 9:23 pm

I need a full float rear axle... :D
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Project Bodge

Post by ScottieJ » Fri Apr 17, 2015 10:11 pm

Anton wrote:I need a full float rear axle... :D
I might have mine for sale at some point.

Nice work ferris :doublethumbs:
Zuki Build

Steady as she goes!
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Project Bodge

Post by Jordi » Sat Apr 18, 2015 9:12 am

ScottieJ wrote:
Anton wrote:I need a full float rear axle... :D
I might have mine for sale at some point.

Nice work ferris :doublethumbs:
Hopefully i'll have mine sometime before i'm 30.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Sun May 10, 2015 8:21 pm

Finally made a start on the axle swap last week. Havent got very far yet as you can see in the pics.
This is how its looking at the moment...

Image

I'm swapping the heavy duty YJ's i'v had on the back for some standard duty YJ's. These should hopfully give a bit more flex.

Image

I also thought id put a bit of paint on the inner wheel arches, as there was a couple of spots of rust coming through. So got the wire brush out and ended up with this :roll:

Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
ScottieJ
The Boss
The Boss
Posts: 11620
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Project Bodge

Post by ScottieJ » Mon May 11, 2015 12:48 am

:guns: looking forward to seeing the axles on! Man that's a shame you found rust hiding! Always best to get it fixed before it spreads further though.

I might be interested in the HD Yjs if you want to part with them?
Zuki Build

Steady as she goes!
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Tue May 12, 2015 6:51 pm

ScottieJ wrote::guns: looking forward to seeing the axles on! Man that's a shame you found rust hiding! Always best to get it fixed before it spreads further though.

I might be interested in the HD Yjs if you want to part with them?

I may part with them at some point, just got to see how i get on with these new ones first.

Made a matching hole on the other wheel arch earlier, but its all welded back up now. Just got to splash a bit of paint round and i can get back on with the axles again.
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
trotter
Winching along now
Winching along now
Posts: 617
Joined: Tue Apr 15, 2008 5:59 pm
Location: behind you

Re: Project Bodge

Post by trotter » Thu May 14, 2015 9:45 pm

looking good dude!
if in doubt, FLAT OUT!

mans tool kit > duct tape, wd40 and a bfh is all you ever need
Top
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Project Bodge

Post by ferris » Sun May 17, 2015 8:39 pm

Weekly update time again :lol: . Not got as far as i'd hoped due to some unscedualed welding on the rear arches, but there all sorted now.

This caused alot of head scratching. There wasn't enough room in this hub for the oil seal :er: . Not sure what had happed to it in its past life but it turned out it was 5mm shorted than it was originally. Luckily i had a couple of spares.
Image

Really like these new bearing lock nuts, much easyer to take on and off.
Image

Rear axle is pretty much done now, just need to make up some new brake pipes.
Image

Its going to be wide!!
Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
Top
User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Project Bodge

Post by dan_2k_uk » Mon May 18, 2015 11:08 am

I really need to get on with my YJ and FF.

Looking good. Be interesting to see how much extra flex it free up.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Top
Post Reply

Return to “Builds and Projects”