1.3 engine to 1.6 vitara, speedo doesn't work an revs don't

Got an electrical gremlin? Ask the question here.
Post Reply
Jayanson1997
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Oct 17, 2015 10:00 pm

1.3 engine to 1.6 vitara, speedo doesn't work an revs don't

Post by Jayanson1997 » Sat Oct 17, 2015 10:20 pm

New to this site!

Just bought an sj413 been converted to a 1.6 vitara, just need to get speedo an rev counter working, think I might know what's up with speedo but rev counter I don't, not a wiring person myself, an there's loads of spare wires hanging everywhere, can I get rid of them or should I keep them, cause the wiring looks a mess, any suggestions will be replied to thanks!

Jay!

User avatar
ScottieJ
The Boss
The Boss
Posts: 11607
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by ScottieJ » Sat Oct 17, 2015 11:53 pm

The speedo is cable driven from the transfer box.

Is it the 1.6 8v or 16v engine?

If 8v the Rev counter is just wired to the - side of the ignition coil, it should be a brown wire.
Zuki Build

Steady as she goes!

Jayanson1997
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Oct 17, 2015 10:00 pm

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by Jayanson1997 » Sun Oct 18, 2015 10:51 pm

It's a 16v engine, no coil on it, can't find the brown wire that is meant to be on it, but it has got the vitara plugs for the dash hanging down,
The speedo is all connected up, but just bounces all over the place ?
Thanks jay!

User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4552
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by ROBBIE » Mon Oct 19, 2015 11:43 am

Ignore this. I didn't read the post properly
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7532
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by Jordi » Wed Oct 21, 2015 3:11 pm

Speedo cable may be snapped.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

User avatar
ScottieJ
The Boss
The Boss
Posts: 11607
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by ScottieJ » Wed Oct 21, 2015 5:12 pm

Jordi wrote:Speedo cable may be snapped.
or kinked somewhere if it's bouncing.

There is a way to wire up the 16v to the stock rev counter but I will have to find the thread on it for you.
Zuki Build

Steady as she goes!

Jayanson1997
Got muddy boots
Got muddy boots
Posts: 8
Joined: Sat Oct 17, 2015 10:00 pm

Re: 1.3 engine to 1.6 vitara, speedo doesn't work an revs do

Post by Jayanson1997 » Thu Oct 22, 2015 11:02 pm

Speedo cable all connected up, the needle bounces all over the place?
If you can find the thread for that, that'll be sound
Cheers

Post Reply