Andys dabble in disco land.

Got an vehicle build underway? post up pictures and tell us all how its going!

Builds threads only please.
Post Reply
User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:
Contact twiss

Re: Andys dabble in disco land.

Post by twiss » Wed Feb 22, 2017 3:46 pm

lol top quality fiberglass over rust repair job there
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Andys dabble in disco land.

Post by Anton » Fri Feb 24, 2017 3:11 pm

I recently helped a mate fibreglass in a few big holes in an old transit, but we cut the rust out first. Nought wrong with fibreglass in a body on chassis vehicle, as long as you clean up the metal first and seal it so it doesn't just rust from the inside out. Better to weld in new metal, sure - but we didn't have a welder delicate enough (only had an ARC welder that just blew holes through the body the moment you touched it, even on min settings), and the MOT was looming...
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Andys dabble in disco land.

Post by andyrew » Sat Mar 04, 2017 1:10 am

Suzuki 1 : disco 0

Opps.
Attachments
Screenshot_2017-03-04-01-05-03-1.png
Screenshot_2017-03-04-01-05-03-1.png (295.89 KiB) Viewed 8440 times
Andys Rusty Suzuki Emporium
Top
User avatar
ROBBIE
I spend far too much time on here
I spend far too much time on here
Posts: 4555
Joined: Tue Sep 09, 2008 6:32 pm
Location: Dorset or stuck

Re: Andys dabble in disco land.

Post by ROBBIE » Sat Mar 04, 2017 8:45 am

:hahaha: :hahaha:
Sid James gone but never forgotten
Jimny 1.6 not as good as an SJ but still good
Top
User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Andys dabble in disco land.

Post by kiwizook » Sat Mar 04, 2017 8:50 am

That's what we've all been trying to explain to you! :hahaha:
It's not a question of how much you spend on your suzuki, but when your money will run out
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Andys dabble in disco land.

Post by andyrew » Mon Mar 06, 2017 8:53 pm

:D

What happened was , i rolled the zuk out of the barn to back the disco in and as reversing in i swang the front round and the two front corners met and the disco got all out of shape. Zuk was fine.

Straightened out fine, then the following day i was in a really tight multistory carpark and nudged a barrier on the exit ramp and pushed it all out of shape again.
Andys Rusty Suzuki Emporium
Top
User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7534
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Andys dabble in disco land.

Post by Jordi » Tue Mar 07, 2017 6:55 am

andyrew wrote::D

What happened was , i rolled the zuk out of the barn to back the disco in and as reversing in i swang the front round and the two front corners met and the disco got all out of shape. Zuk was fine.

Straightened out fine, then the following day i was in a really tight multistory carpark and nudged a barrier on the exit ramp and pushed it all out of shape again.
Remind me not to park too mear you at events.
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Andys dabble in disco land.

Post by andyrew » Sat Mar 25, 2017 11:08 pm

Todays disco dabble,

Whats behind the blue door? A shit load of rust i can tell ya!
Attachments
Screenshot_2017-03-25-23-01-05-1.png
Screenshot_2017-03-25-23-01-05-1.png (364.52 KiB) Viewed 8300 times
Screenshot_2017-03-25-23-01-23-1.png
Screenshot_2017-03-25-23-01-23-1.png (438.14 KiB) Viewed 8300 times
Andys Rusty Suzuki Emporium
Top
User avatar
andyrew
SCUK is my life
SCUK is my life
Posts: 1820
Joined: Fri Jul 31, 2009 12:39 am

Re: Andys dabble in disco land.

Post by andyrew » Sat Mar 25, 2017 11:12 pm

Inner wing repair and new arch panel fitted, just slapped on some primer for now with the worlds crappest paint brush.

Ill dress the corner welds back when i can get some bits for the die grinder.
Attachments
Screenshot_2017-03-25-23-01-53-1.png
Screenshot_2017-03-25-23-01-53-1.png (259.92 KiB) Viewed 8299 times
Screenshot_2017-03-25-23-13-31-1.png
Screenshot_2017-03-25-23-13-31-1.png (222.77 KiB) Viewed 8298 times
Andys Rusty Suzuki Emporium
Top
Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Andys dabble in disco land.

Post by Anton » Sun Mar 26, 2017 9:45 am

Were you meaning to do a complete resto job when you bought it, or is it just in your blood to make rustbuckets all shiney?
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread ● To-do list ● Pay and Play map
Top
Post Reply

Return to “Builds and Projects”