Suzuki Ignis Engine in a Sammi
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Suzuki Ignis Engine in a Sammi
Possibly a bit cheaper on insurance for you as well mate
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Suzuki Ignis Engine in a Sammi
Ok, I reeeeally want to follow you now Ladaman, and put an M15a in my SJ. It's the last job on my list, but I'd like to be able to tow with my SJ, and 65ft/lb (oficially, probably more like 50) of torque just isn't going to cut it.
This should be an awesome SJ when you're done - keep at it man!
Oh, and how hard has it been to get the loom and ECU to fit?
This should be an awesome SJ when you're done - keep at it man!
Oh, and how hard has it been to get the loom and ECU to fit?
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Suzuki Ignis Engine in a Sammi
98ft/lb here 
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Suzuki Ignis Engine in a Sammi
Soon be
Power Output 107 bhp
Torque 140 Nm 103 lb-ft
Here
Fitting the loom and ECU in the car, piece of cake.
Getting them to work, don't know yet!!
Power Output 107 bhp
Torque 140 Nm 103 lb-ft
Here
Trying my best mate, but SLOWLY getting there.Anton wrote:This should be an awesome SJ when you're done - keep at it man!
Oh, and how hard has it been to get the loom and ECU to fit?
Fitting the loom and ECU in the car, piece of cake.
Getting them to work, don't know yet!!
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Suzuki Ignis Engine in a Sammi
You can do it!Ladaman wrote:Fitting the loom and ECU in the car, piece of cake.
Getting them to work, don't know yet!!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Suzuki Ignis Engine in a Sammi
I prefer as few wires as possible... but saying that its only auto wiring, its not brain surgery
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
turbo-tom
- I spend far too much time on here
- Posts: 4478
- Joined: Fri Jun 25, 2010 9:29 pm
- Location: West Sussex
Re: Suzuki Ignis Engine in a Sammi
am i mad if i say i like auto electrics? okay im not amazing at it but i like doing it! 
Tom
Ford Fiesta ST
Ford Fiesta ST
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Suzuki Ignis Engine in a Sammi
You may recieve a call from me when it comes time to do mine then...turbo-tom wrote:am i mad if i say i like auto electrics? okay im not amazing at it but i like doing it!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
Re: Suzuki Ignis Engine in a Sammi
Electrics don't bother me, you should see the loom I just pulled out of the GV 
luckily I only need about 25% of it for the j20a conversion
luckily I only need about 25% of it for the j20a conversion -
Edweird
- Suzuki, will you marry me?
- Posts: 2531
- Joined: Sat Jan 23, 2010 11:04 pm
- Location: Brigg, North Lincolnshire
Re: Suzuki Ignis Engine in a Sammi
I like doing auto electrics so long as it's relatively simple and easy to access; thus ruling out anything post Millennium.
There's three ways of doing things:
The right way,
The wrong way
And my way, which is like the wrong way but faster.
The right way,
The wrong way
And my way, which is like the wrong way but faster.