Got an vehicle build underway? post up pictures and tell us all how its going!
Builds threads only please.
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Sat Sep 13, 2014 5:21 pm
im quite pleased with apart from the gap on the passenger side! unfortunatly it warped a bit and as i welded it up off the vehicle i didn't notice
but it works for now so it's on lol just want to get it on the road now! will perhaps do a bit of cut and shut on it later along with other cosmetics like the rusty wings, now only need to bleed brakes and get a brake light bulb
- DSCF8218bb.jpg (68.45 KiB) Viewed 6677 times
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Sun Sep 21, 2014 11:59 am
found new wings for £35 a piece so ordered up a drivers side the now (cos they only had 3 left!) and get the passenger side next pay day hopefully, does anyone have such a thing as a rear bumper reinforcement/support bar thingy in good condition for sale? this ones rusted out my fogs are currently held in with sillicon!
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Mon Oct 06, 2014 10:17 am
MOT on Wednesday!!
hope it passes!
- Photo0472.jpg (330.8 KiB) Viewed 6634 times
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Wed Oct 08, 2014 5:44 pm
failed
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
-
Contact:
Post
by twiss » Wed Oct 08, 2014 6:55 pm
On what...?
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Wed Oct 08, 2014 7:29 pm
n/s headlamp aim- figures since someone went into front of it before I got it
one tyre starting to separate - never noticed on inside edge
exhaust corroded- knew that but didn't think it was too bad meself expected an advisory
emissions- all tests :/ - hmm it's misfiring quite a bit ordered some new plugs after that bit over my head petrols not really my thing
weeping union on front caliper- hopefully just a nip up
front to rear brake pipes excessive corrosion
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
-
Contact:
Post
by twiss » Wed Oct 08, 2014 7:34 pm
they failed you on a corroded exhaust? and theres not a hole in it?
take it to a different mot station lol
not too bad, get yourself a brake line kit... think they are £30-35 on ebay including the copper pipe?
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
-
shredder
- Got muddy boots
- Posts: 76
- Joined: Mon Apr 14, 2014 6:09 pm
- Location: scottish borders
Post
by shredder » Wed Oct 08, 2014 7:44 pm
there is a hole but its quite small i'e doubt you would get a pencil in it in rear silencer also a bigger hole in the last 6 inch of pipe but wouldn't have thought that would matter right by the exit? getting a quote of garage if not to scary might just get it done!
-
donkeychomp
- I spend far too much time on here
- Posts: 3582
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Post
by donkeychomp » Wed Oct 08, 2014 10:25 pm
Wire brush the brake lines and paint them, chop off holey part of zorst and plonk a cherry bomb on.
If it ticks over...leave it
