Hello from isle of wight

New to SCUK.co.uk? say hello, give us an idea of who you are, and show us a pic of your pride and joy. were friendly and wont bite!
Van Dam
Got muddy boots
Got muddy boots
Posts: 15
Joined: Wed Nov 19, 2014 10:05 pm

Hello from isle of wight

Post by Van Dam » Wed Nov 19, 2014 10:16 pm

hi im jasper from isle of wight uk
bought my first zuni yesterday i believe it belonged to a old member on here called angie
unfortantley some young fool bought it and has wrecked it so i will be starting the job of returning to a good standard level
don't have any pictures as of now but will get some tomorrow

the guy i bought it off has done a 3inch body lift which is of very bad quality so as of tomorrow i will be trying to solve this
nice to meet you all :rhino:

User avatar
Ladaman
Suzuki Guru
Suzuki Guru
Posts: 1090
Joined: Thu Sep 08, 2011 10:56 pm
Location: Huddersfield, W. Yorkshire
Contact:

Re: Hello from isle of wight

Post by Ladaman » Wed Nov 19, 2014 10:24 pm

:welcome: to the club.

Look forward to some pics. What is it SJ, Vit or Jimny?
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage

User avatar
Jordi
Bow down before me
Bow down before me
Posts: 7535
Joined: Sun Nov 29, 2009 2:35 pm
Location: Darlington, Co. Durham

Re: Hello from isle of wight

Post by Jordi » Wed Nov 19, 2014 10:28 pm

Welcome to SCUK.

Fairly sure it's an SJ
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank

Van Dam
Got muddy boots
Got muddy boots
Posts: 15
Joined: Wed Nov 19, 2014 10:05 pm

Re: Hello from isle of wight

Post by Van Dam » Wed Nov 19, 2014 10:55 pm

its a sj 410
just found a picture but looks very different was dark by the time i got it home so couldn't get any today yet alone asses the damages too much!
this is it not in the best of states was going to buy it about 5 months ago but unfortunately could not and someone else got it and ruined it!
Attachments
10153062_10202378426290859_1840236861449555545_n.jpg
10153062_10202378426290859_1840236861449555545_n.jpg (185.59 KiB) Viewed 6309 times

User avatar
Darrell
Suzuki, will you marry me?
Suzuki, will you marry me?
Posts: 2988
Joined: Wed Feb 23, 2011 7:54 pm
Location: south oxfordshire
Contact:

Re: Hello from isle of wight

Post by Darrell » Wed Nov 19, 2014 11:39 pm

Welcome to the club.

I remember Angie :thumbup: http://forum.suzukiclubuk.co.uk/vi ... =30&t=4375
2005-GV 1600se, "Hell" What do I know!

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Hello from isle of wight

Post by Anton » Thu Nov 20, 2014 12:53 am

Body lift - I did that to mine. And un-did that to mine. Yuk.

Welcome, and good on you for rescuing the wee beastie.
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Hello from isle of wight

Post by ferris » Thu Nov 20, 2014 7:50 am

:welcome: To the club. I remember that truck. Hopefully you can get it back to its former glory :thumbup:
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.

Van Dam
Got muddy boots
Got muddy boots
Posts: 15
Joined: Wed Nov 19, 2014 10:05 pm

Re: Hello from isle of wight

Post by Van Dam » Thu Nov 20, 2014 11:01 am

So started accessing damage today and is slightly worse than I thought!
The winch is broken with cable fully out when pushing the controls the control box just clicks? Any ideas?
Whole rear left hand arch and side is rusted very badly
Hope I haven't bitten off more than I can chew!
Won't let me upload pictures straight from my phone!
Will upload to laptop later

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: Hello from isle of wight

Post by dan_2k_uk » Thu Nov 20, 2014 7:54 pm

Hi and welcome. Yeah I remember that.

If you're lucky the winch will just be a bad connection in the solenoid pack.
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

Van Dam
Got muddy boots
Got muddy boots
Posts: 15
Joined: Wed Nov 19, 2014 10:05 pm

Re: Hello from isle of wight

Post by Van Dam » Thu Nov 20, 2014 9:42 pm

done lots of inspecting working out what needs doing and my god can't believe how quick a car can get ruined in such a small amount of time!

hopefully i can get a few pointers from all you more experienced zuki owners!
Attachments
so the body life has been done with strange blocks like this not much  welding just bolts all the way through!<br />to undo this action is it a easy process? can i remove them two at a time?<br />if the previous owners have extended brake hoses etc will i have to shorten ?<br />the gearbox still has same transition as it sits 3 inches under the body!!<br />i am a complete noob when it comes to this
so the body life has been done with strange blocks like this not much welding just bolts all the way through!
to undo this action is it a easy process? can i remove them two at a time?
if the previous owners have extended brake hoses etc will i have to shorten ?
the gearbox still has same transition as it sits 3 inches under the body!!
i am a complete noob when it comes to this
IMG_0611.JPG.jpeg (402.86 KiB) Viewed 6259 times
where the hard top has been sitting on side panel lots of rust will this be repairable?<br />(had to use saw dust to soak up spilled gear box oil covered basically the whole car!)
where the hard top has been sitting on side panel lots of rust will this be repairable?
(had to use saw dust to soak up spilled gear box oil covered basically the whole car!)
IMG_0624.JPG.jpeg (453.47 KiB) Viewed 6259 times
this is how the gearbox is currently sitting <br />not to good?
this is how the gearbox is currently sitting
not to good?
IMG_0627.JPG.jpeg (456.93 KiB) Viewed 6259 times
you can see through where rear left arch is completely deteriorated hopefully repairable not so sure on how to go about doing this
you can see through where rear left arch is completely deteriorated hopefully repairable not so sure on how to go about doing this
IMG_0625.JPG.jpeg (477.06 KiB) Viewed 6259 times

Post Reply