Page 3 of 3
Re: Newbie with SJ problems :)
Posted: Wed Nov 13, 2013 10:41 pm
by Darrell
Jordi wrote:The adaptor does not affect the starter / flywheel spacing. It just moves the gearbox back a few mm.
The starter still sits flush with the back of the engine as if mounted direct to the gear box.
Thinking about it your right
Sometimes I can be a right
I'm tired , maybe I should go to sleep
Re: Newbie with SJ problems :)
Posted: Wed Nov 13, 2013 10:54 pm
by ScottieJ
In those pics you posted Darrel take not of the starters gear position in relation to the mounting face, the Sj starters gear sits a lot further back in the housing, I wouldnt be surprised if hilly's starter is constantly slightly meshed with the ring gear
Looks like you have the wrong starter hilly.
Re: Newbie with SJ problems :)
Posted: Wed Nov 13, 2013 11:05 pm
by Darrell
Like so...........
Re: Newbie with SJ problems :)
Posted: Thu Nov 14, 2013 9:12 am
by twiss
Well picturised Darrell!
I've had a look at mine this morning.... I have 3 regular starters, 2 skinny mitsubishi starters, and 2 skinny valeo starter and all the gears do sit behind or level with the mounting face!
Shame they are all broken or you could have one of them!