the ultamate leaf spring set up

Post your questions about your suspension and steering problems here!
Post Reply
bushwacker
Got muddy boots
Got muddy boots
Posts: 1
Joined: Thu Jun 03, 2010 11:17 pm

the ultamate leaf spring set up

Post by bushwacker » Sat Jun 19, 2010 8:10 pm

hi ya all 8-) i am new on here but not to 4x4s, i red a post by dave at lama4x4, it was good reading ,the yanks use a lot of differant leaf spring set ups for there ofroaders but for a road leagle truck iam not so sure ie mot and VOSA, i would like some opinions on the ultamate leaf spring set up for a on and of road truck, as i am just starting a re build.................pete ps its an sj410

User avatar
ScottieJ
The Boss
The Boss
Posts: 11607
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: the ultamate leaf spring set up

Post by ScottieJ » Mon Jun 21, 2010 12:49 pm

YJ leaf springs are the best way to go. you can get bolt on conversions from the states however i'm not sure if they fit a 410??? as the chassis is different to that of a samurai. it should be fine with vosa and mr mot too as it is a bolt on conversion so you are not modding the chassis.
Zuki Build

Steady as she goes!

Post Reply