Looks good!!
Now everything has settled check your Driveline angles, it only takes a few degrees to cause vibes.
Fitting YJ springs to a Samurai
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Fitting YJ springs to a Samurai
Thanks guys.
Good news. The vibration was coming from the front prop. I re fitted the standard Samurai one, just to give 4WD. Knowing it was too short really. That's what the problem turned out to be, not enough spline engagement so allowing wobble between the two halves.
Had a drive without it fitted and all is good. Just need to be patient now and get the LJ70 prop back from the fabricators and try that.
Good news. The vibration was coming from the front prop. I re fitted the standard Samurai one, just to give 4WD. Knowing it was too short really. That's what the problem turned out to be, not enough spline engagement so allowing wobble between the two halves.
Had a drive without it fitted and all is good. Just need to be patient now and get the LJ70 prop back from the fabricators and try that.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Fitting YJ springs to a Samurai
Great stuff. Looks like it performs well.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
zukenstein
- Got muddy boots
- Posts: 53
- Joined: Sun Jan 11, 2009 9:12 pm
Re: Fitting YJ springs to a Samurai
Ladaman - Looks good any pics of the back springs and how far they stick out at the back, shackle angle etc?
Zuk·en·stein - A monster made from parts of cadavers and brought to life by the power of an electrical charge.
What the fool cannot understand he laughs at, thinking that by his laughter he shows superiority instead of latent idiocy.
What the fool cannot understand he laughs at, thinking that by his laughter he shows superiority instead of latent idiocy.
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Fitting YJ springs to a Samurai
I will get you some pics Monday night. I've been out today.
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
Anton
- I spend far too much time on here
- Posts: 3859
- Joined: Tue Jan 12, 2010 12:12 pm
- Location: London
Re: Fitting YJ springs to a Samurai
Looks brilliant!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!
My: Build thread ● To-do list ● Pay and Play map
My: Build thread ● To-do list ● Pay and Play map
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Fitting YJ springs to a Samurai
Here you go. Not the best shot, and I must admit I'm not overjoyed with the extra length on the tail end of the springs, but hey ho. It's all part of the "development" isn't it?zukenstein wrote:Ladaman - Looks good any pics of the back springs and how far they stick out at the back, shackle angle etc?
The upside is, I have just tried my 31's on, and expecting to need to do a virtual lift, but I think I'm going to be OK with just some thinnish front wheel spacers
Who know's if it really bugs me I might just bite the bullet and get some proper YJ's.
- Attachments
-
- photo.JPG (295.39 KiB) Viewed 6912 times
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
zukenstein
- Got muddy boots
- Posts: 53
- Joined: Sun Jan 11, 2009 9:12 pm
Re: Fitting YJ springs to a Samurai
cheers Ladaman thanks for that 
Zuk·en·stein - A monster made from parts of cadavers and brought to life by the power of an electrical charge.
What the fool cannot understand he laughs at, thinking that by his laughter he shows superiority instead of latent idiocy.
What the fool cannot understand he laughs at, thinking that by his laughter he shows superiority instead of latent idiocy.
-
Ladaman
- Suzuki Guru
- Posts: 1090
- Joined: Thu Sep 08, 2011 10:56 pm
- Location: Huddersfield, W. Yorkshire
- Contact:
Re: Fitting YJ springs to a Samurai
I went to work in the Suzuki today as the weather was nice. at lunchtime I got one of the guys to assist with a bit of a flex test. All looks to be okay, so lets see how it performs at Tong on Sunday.
Will the "protruding" shackles be an issue? Lets wait and see.
Will the "protruding" shackles be an issue? Lets wait and see.
- Attachments
-
- IMG_2482.JPG (1.69 MiB) Viewed 6840 times
YouTube
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
Ignis Sport 1.5 16V; Jimny gearbox, 410 transfer box; 5.125:1 Vitara diffs; rear Lockright, Rob Storr full float rear axle, rear discs, YJ springs, virtual lift, 31" Grizzly Claws, beadlock rims, +50mm LR arches, LED rear lights, LED roof spots, bucket seats, Luke harnesses, internal cage
-
Cyprus Geoff
- Can I have a tow
- Posts: 251
- Joined: Sun Apr 20, 2008 5:54 am
- Location: Paphos, Cyprus
Re: Fitting YJ springs to a Samurai
Looks great, how close to the filler did you get with the new plastic wheel arch
on the drivers side?
on the drivers side?