Re-Tuning Carb After Fitting Snorkel?

Engine not running right? see if we can help you!
Post Reply
User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re-Tuning Carb After Fitting Snorkel?

Post by ferris » Mon Dec 08, 2014 5:37 pm

Ok, so i haven't actually fitted a snorkel yet. Just re possitioned the air box to the other side of the engine bay, ready to go through the bulkhead. I have used 63mm tube and a universal in line air filter. Since doing this it hasn't been running right. Its fine if i accelerate slowly but if i put my foot down it just boggs down.

I'v have adjusted the carb to make it richer and this has improved things slightly, but im a bit reluctant to just keep making it richer because it was running fine before.

Has anyone els had to re tune there carb after fitting a snorkel?

(its a 1.6 with su carb)
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.

User avatar
kiwizook
SCUK Addict
SCUK Addict
Posts: 879
Joined: Fri Dec 28, 2012 2:36 am
Location: Masterton, NZ

Re: Re-Tuning Carb After Fitting Snorkel?

Post by kiwizook » Mon Dec 08, 2014 9:22 pm

I'm guessing you would, as the additional pipe work will affect the airflow. I would think it's just like tuning a multiple carburettor system, after tuning one, you have to adjust the whole lot. Anyways, that's just my humble uneducated thinking :lol:
It's not a question of how much you spend on your suzuki, but when your money will run out

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Re-Tuning Carb After Fitting Snorkel?

Post by twiss » Tue Dec 09, 2014 8:27 am

I found that when I put a snorkel that was too small/borderline on the carb did need retuning as it restricted airflow.... when I moved up to a much larger pipe, it didn't make any difference
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
kibris
Engaged 4wd low
Engaged 4wd low
Posts: 108
Joined: Wed Jul 18, 2012 9:06 am
Location: Alsancak, Girne, Cyprus

Re: Re-Tuning Carb After Fitting Snorkel?

Post by kibris » Tue Dec 09, 2014 11:57 am

What size pipe does everyone use for the home made Snorkels?

User avatar
ScottieJ
The Boss
The Boss
Posts: 11607
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Re-Tuning Carb After Fitting Snorkel?

Post by ScottieJ » Tue Dec 09, 2014 12:05 pm

I usually use around 80mm for the 1.6
Zuki Build

Steady as she goes!

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Re-Tuning Carb After Fitting Snorkel?

Post by twiss » Tue Dec 09, 2014 3:08 pm

I was using 45mm and it was just about OK for the 1.3 but noticeably too small for the 1.6...
My snorkel is now about 75mm and seemed to work OK... but its currently on a shelf ;)
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ferris
Suzuki Guru
Suzuki Guru
Posts: 1226
Joined: Thu Jul 23, 2009 3:55 pm
Location: Bristol

Re: Re-Tuning Carb After Fitting Snorkel?

Post by ferris » Tue Dec 09, 2014 5:49 pm

I think iv solved the problem. Just put some thicker oil in the dash pot and it seems to be running better. We will see for sure when i drve it to work tomorrow.

Heres a picture of what i have done so far..... bit over the top i know
Image
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.

User avatar
twiss
SCUK Computer Wizard
SCUK Computer Wizard
Posts: 6110
Joined: Mon Nov 08, 2010 2:28 pm
Location: Birkirkara, Malta
Contact:

Re: Re-Tuning Carb After Fitting Snorkel?

Post by twiss » Tue Dec 09, 2014 6:46 pm

Looks good!
Sorry to nitpick though but isn't the hot air coming off the radiator going to heat up that pipe a bit and thus heat up your intake air?
Probably not so much of a problem when you are driving on road, but going slowly off road when the engine is at its warmest, you don't really want to be heating up the air going into it as well
Twiss

'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410

"If brute force doesn't fix your problem, you aren't using enough of it."

User avatar
ScottieJ
The Boss
The Boss
Posts: 11607
Joined: Tue Apr 15, 2008 12:13 pm
Location: Chippenham, wiltshire

Re: Re-Tuning Carb After Fitting Snorkel?

Post by ScottieJ » Wed Dec 10, 2014 12:16 am

I think I would have moved the battery over to the other side, that's a lot of pipe work.
Zuki Build

Steady as she goes!

Anton
I spend far too much time on here
I spend far too much time on here
Posts: 3859
Joined: Tue Jan 12, 2010 12:12 pm
Location: London

Re: Re-Tuning Carb After Fitting Snorkel?

Post by Anton » Wed Dec 10, 2014 3:13 am

Top work though!
1985 SJ413VX (SJ50V) with SPOA, rear disc brakes, 31x10.5R15 Kaiman Malatesta tyres, an MOT and a lot left to do!

My: Build thread To-do list Pay and Play map

Post Reply