Kiwizook's resto

[turbo-tom]

[kiwizook]

Thanks guys, I'll keep it updated hopefully, might do some work on it in a sec, gotta cut out the rotted support under the floor pan, which is in a akward spot, so wish me luck

[Darrell]

Good luck

[kiwizook]

does anyone know what sorts of carbs I could use on a sj410 engine? My old one has severe issues, and I was thinking of what ones to use, I know a su carb will work, but is there any other ones I could use?

what a horrible sight!

Pic_1228_012.jpg (19.43 KiB) Viewed 7737 times

[kiwizook]

So, i cut out some more rust in the footwell, and saw this:

rusty throtle pedal mounting

Pic_1229_022.jpg (14.32 KiB) Viewed 7722 times

So I guess I will have to take the pedal of, and weld on a new mount, to make it a bit more robust

By the way, this is the condition of my bumper

bumper condition

Pic_1229_024.jpg (24.98 KiB) Viewed 7722 times

and just for your informations sake, if you ever see tires like these, consider buying them as they are great tires, they are actually officially snow tyres, but are just amazing in the mud

some real rubbers!

Pic_1229_023.jpg (24.12 KiB) Viewed 7722 times

[kiwizook]

So, I got a little more done today.
the old man's Mr Angry packed up, so i went to borrow one at work, and done some of the heavy rust cutting.

floor pan support cut away

Pic_1231_028.jpg (21.4 KiB) Viewed 7664 times

The floor pan support is a little rusted too as you can see in the last picture. This is where the bullbars bolt unto as well, so do you reckon i should fix it, or just hammer it? the rust is only a little bit so...

I started to make a plate to fix the sill end

the new sill bottom i made up, not yet welded

Pic_1231_027.jpg (11.36 KiB) Viewed 7664 times

I also found that the sill had acquired some mud over the years through the rusty hole that used to be there

the inside of the sill

Pic_1231_029.jpg (10.88 KiB) Viewed 7664 times

this appears to be a breather hole for the sill just behind the cab, should i leave it, or close it off?

breather hole open

Pic_1231_030.jpg (12.25 KiB) Viewed 7664 times

breather hole closed

Pic_1231_031.jpg (14.14 KiB) Viewed 7664 times

I am also trying to find a carb for it now, and placed a bid on a su carb, model unknown, so we'll c what happens

[kiwizook]

So I got some more done today.
finished cutting most of the sheetmetal to fix up the right sill

sill plates ready to be welded

Pic_0103_036.jpg (15.99 KiB) Viewed 7617 times

I also cut this plate for the floorpan, but it has a small gap as you can see. Will this be alright to weld?

Pic_0103_037.jpg (12.35 KiB) Viewed 7617 times

I also cut out at the windscreen corner and cut some new plates for it

all cut away

Pic_0103_039.jpg (53.73 KiB) Viewed 7617 times

and some plates cut out for it

Pic_0103_041.jpg (37.88 KiB) Viewed 7617 times

I also organized a welder to use today , and got some tips for it to use 0.6mm wire. The only thing is that I will have to drive there to use the welder , so gotta sort the carb first now. i just bought a su carb, so I'll see if I can get it going

[dan_2k_uk]

Looks like youve really got to it.

You should get away with some small gaps when welding the plates in. Just start on the thicker new metal and work the pool across onto the thin old stuff in really short little bits to try keep it cool and not warp/melt.

Its mainly in the prep so the cleaner you get the old and new parts and the closer fitting they are the easier it will be.

Hope you get lucky with the carb. Any idea what it is yet?

Maybe one of the KJA owners will be able to help you with regards to the sill vent as its not something I've seen on a SWB.

Dan

[kiwizook]

some more rust cutting today, this was the left hand side footwell

Pic_0105_048.jpg (80.88 KiB) Viewed 7566 times

Pic_0105_049.jpg (80.07 KiB) Viewed 7566 times

I also cut the bumper mounts back like in the picture here, but I was thinking i might need it to protect the tyres. Will this be fine like this, or what do you guys think?

Pic_0105_050.jpg (97.83 KiB) Viewed 7566 times

EDITED
I think she needs some wider tyres looking at this pic

[dan_2k_uk]

Half the UK zooks I see including mine have no bumper and the chassis tube cut like that. All legal here and improves approach angle. Dont know what your local vehicle tests are like over there though so cant speak for that part.

Dan