oops . . . diff go boom

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
User avatar
muddymesser
Engaged 4wd low
Engaged 4wd low
Posts: 189
Joined: Mon Jun 29, 2009 9:10 pm
Location: blackpool

oops . . . diff go boom

Post by muddymesser » Fri Mar 22, 2013 9:26 pm

had a little problem afew weeks back with my rear diff . . . only 7 bolts came loose on the crown wheel and it only sheered the remaining 3 on it

oh and broke a chunk off the diff aswell

just until i can get a new diff ive just fitted new bolts and welded the heads so they dont come loose :lol:

luckily i was just around the corner from my workshop when it went so i just put it in 4wd and carried on :lol:
Attachments
026.jpg
026.jpg (1.64 MiB) Viewed 3254 times
027.jpg
027.jpg (1.92 MiB) Viewed 3254 times
028.jpg
028.jpg (2.15 MiB) Viewed 3254 times
029.jpg
029.jpg (2.31 MiB) Viewed 3254 times
030.jpg
030.jpg (2.27 MiB) Viewed 3254 times
031.jpg
031.jpg (2.55 MiB) Viewed 3254 times
032.jpg
032.jpg (1.8 MiB) Viewed 3254 times
033.jpg
033.jpg (2.36 MiB) Viewed 3254 times

User avatar
HuwJones
Engaged 4wd low
Engaged 4wd low
Posts: 126
Joined: Fri Mar 01, 2013 6:43 pm
Location: Knee deep in shit usually.

Re: oops . . . diff go boom

Post by HuwJones » Fri Mar 22, 2013 9:57 pm

Oh dear! That looks nasty! I've seen a prop shaft come off and smash a gearbox housing to pieces. A bit bigger than a SJ one though, it was 5 ft long and 6 inches in diameter, now that made a horrible noise. Sounded like £7K being chewed up !
There's three ways of doing things,
1) The Right Way,
2) The Wrong Way
3) My Way.
2 & 3 are usually the same.

User avatar
muddymesser
Engaged 4wd low
Engaged 4wd low
Posts: 189
Joined: Mon Jun 29, 2009 9:10 pm
Location: blackpool

Re: oops . . . diff go boom

Post by muddymesser » Sat Mar 23, 2013 9:29 am

ouch . . . atleast i know the diff wont cost too much when i come to buy one

Post Reply