Lwb and swb gearbox.
Lwb and swb gearbox.
It's only a quick one and any help will be massively helpful. Can any one confirm if the Lwb gearbox from a 1.6 Vitara fit a swb Vitara still 1.6. Many thanks
Re: Lwb and swb gearbox.
Can't see why the gearbox would be different?
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: Lwb and swb gearbox.
This is good won't be different mounts or anything?.
Re: Lwb and swb gearbox.
I don't know for sure but as far as I know engines and gearboxes would be the same it would just be he length of axle props that would be different
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: Lwb and swb gearbox.
Brilliant. Thank you for help mate
Re: Lwb and swb gearbox.
No worries
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
Re: Lwb and swb gearbox.
Did you find out if it fitted ok mate I'm just about to buy one but I'm unsure and don't seem to be able to find anymore information on the web!
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Lwb and swb gearbox.
All 1.3 gearboxes are physically the same size.
413 and Sammy boxes have slightly differing 5th gear ratio.
413 and Sammy boxes have slightly differing 5th gear ratio.
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
- Jordi
- Bow down before me
- Posts: 7535
- Joined: Sun Nov 29, 2009 2:35 pm
- Location: Darlington, Co. Durham
Re: Lwb and swb gearbox.
I presume the gear boxes are all the same.
Mounts may be different but your existing mounts would swap over.
(it's for a Vit Dan)
Mounts may be different but your existing mounts would swap over.
(it's for a Vit Dan)
1988 Samurai - Truck Cab & Tray Back - 1.6 8v & HIF44 - Snorkel - Stack Exhaust - PAS, YJs & 33s - Trussed, Gusseted & Pumpkin Capped Axles - 4.3 R&Ps - 4.16 T/Box - Rear Air Locker - Full Float Back Axle & Discs - RCV Front Shafts - X-Eng Handbrake - Custom Fuel Tank
- dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: Lwb and swb gearbox.
I'm a tard!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.