Many moons ago the little door on the dash of my jap sami
Fell off. But I struggled to find a good one to replace it.
(Spanish sami ones are a shinny finish and it would bug me)
Ive had a empty hole with just crappy change and rubbish.
At wagtail I got showered in 5p coins and other irritatingly small things
when I hoofed up a small But steep incline.
I like the factory inclinometer but there's no way im paying
The prices they go for!
So after the brutal attack my aftermarket inclo did to me
I ripped it to bits! And decided to start making a better version
Inclinometer my way
Inclinometer my way
- Attachments
-
- 20140120_174059.jpg (2.64 MiB) Viewed 9969 times
-
- 20140120_164819.jpg (2.66 MiB) Viewed 9969 times
-
- 20140120_164813.jpg (2.33 MiB) Viewed 9969 times
Andys Rusty Suzuki Emporium
-
donkeychomp
- I spend far too much time on here
- Posts: 3583
- Joined: Thu Aug 18, 2011 3:49 pm
- Location: Shepperton, Middx
Re: Inclinometer my way
Nice work as usual matey. I need to get one of those!
If it ticks over...leave it
-
muddymesser
- Engaged 4wd low
- Posts: 189
- Joined: Mon Jun 29, 2009 9:10 pm
- Location: blackpool
Re: Inclinometer my way
looks good . . . will be interesting to see if it site level when its in
Re: Inclinometer my way
I thought this too but its basically two gears and a weight.muddymesser wrote:looks good . . . will be interesting to see if it site level when its in
So I just disengaged the gears and repositioned the weight
Now the dial reads level
Andys Rusty Suzuki Emporium
-
Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Inclinometer my way
I'm impressed and looking forward to see it fitted, I've wanted one for ages and this might be a lot better than a standard one! Or at least cheaper!
-
twiss
- SCUK Computer Wizard
- Posts: 6110
- Joined: Mon Nov 08, 2010 2:28 pm
- Location: Birkirkara, Malta
- Contact:
Re: Inclinometer my way
looks good man! I think I might rethink my dash Idea and put a phone in that slot... go back to the standard temp gauge and replace the cluster with a working one!
if i can do it anywhere near as tidy as that I'll be impressed
if i can do it anywhere near as tidy as that I'll be impressed
Twiss
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
'93 Suzuki Samurai Sport 1.6 16v SU. Virtual lift, spring under, 31s
'93 Maruti Gypsy MG410
"If brute force doesn't fix your problem, you aren't using enough of it."
Re: Inclinometer my way
Next step is a bit overkill but im a bit of a factory look
Person. I noticed that the old door is not completely
Flat so ive cut the door in half and stuck the two pieces
And the new frame down on a flat surface and skimmed
Over with filler to match the radius of the panel around the clock
Ill get some photos when ive finished the prep
Person. I noticed that the old door is not completely
Flat so ive cut the door in half and stuck the two pieces
And the new frame down on a flat surface and skimmed
Over with filler to match the radius of the panel around the clock
Ill get some photos when ive finished the prep
- Attachments
-
- 20140122_160351.jpg (2.11 MiB) Viewed 9938 times
Andys Rusty Suzuki Emporium
-
Tramp
- Suzuki, will you marry me?
- Posts: 2828
- Joined: Fri Jul 25, 2008 10:09 pm
- Location: Rotherham - South Yorkshire
Re: Inclinometer my way
Any updates on this?
Re: Inclinometer my way
When i bought mine it already had this installed on the dashboard.....these were on ebay for about 12 pounds each seems to work quite well, also the unit on its right which is a rev limiter come resettable audio warning that one can set the rpm to
- Attachments
-
- PDR_0062.JPG (391.23 KiB) Viewed 9728 times
Re: Inclinometer my way
Sorry rev limiter not in the picture
jim
jim