Power steering options

[Gardiner]

Hi all what are the options for a SJ to put power steering on.
I got a SJ with a 5" Calmini full suspension lift.
Thanks in advance

[zook123]

As I popped in your other post, Jimny PS will fit.

http://forum.suzukiclubuk.co.uk/vi ... php?t=1634

[Gardiner]

So will the pump off a jimny or vitara bolt ok to block of a 413 and what bottom pulley and Pittman arm issues might I encounter

[ScottieJ]

The pump mount off an Vit G16 8v engine fits.

You will need to tweak the rad mount on the chassis though for the pump pulley clearance.

If you have a drop pitman arm with your calmini lift kit then it will not fit the jimny box, I don't think there's a drop pitman arm available for the jimny box.
If you aren't running a drop pitman arm then the stock jimny pitman arm will be pretty much the same steering geometry wise as the stock sj pitman.

[Gardiner]

I think there is a drop pitman arm on her i bought it with kit on and when i look on calmini website it comes with one so what would the next option be ??

[Curtisflip]

I added electric steering, easy fab to do and reasonable cost. Here is a link to my write up.
http://bbs.zuwharrie.com/content?topic=134451.0

https://www.youtube.com/watch?v=90e4fUhcH_4

[tomcat]

Can I revive this thread with a question.
Have purchased a PAS system from a Jimny.
The engine mount for the PAS pump is as the attached pictures.
It does not seem to fit my G13A Santana Samurai engine. What am I getting wrong?

[ScottieJ]

Was the set up and mount from a Jimny with an M series engine? You need a mount from a vitara G16 8v engine. It’s still not always a straight bolt on swap though as it can be tight for chassis clearance

[tomcat]

Scott
Your comments noted. Thanks.