rear brake probs

Starts at the flywheel, ends at the hubs, any problems along them lines, ask your questions here.
Post Reply
saturdaynightbeaver
Got muddy boots
Got muddy boots
Posts: 11
Joined: Sat Sep 27, 2008 9:22 pm

rear brake probs

Post by saturdaynightbeaver » Sat Sep 27, 2008 9:32 pm

Firstly...HELLO - this is my first post!

Secondly....I've just got myself a 1988 SJ413 (not sure if its a jap or spanish model...) - the problem i have at the moment is that the rear left brake seems stronger than the right, when braking the whole vehicle pulls slightly left and under hard braking the wheel locks. I have had both drums off today, as i thought the auto adjusters might be playing up - they were full of crap but this hasn't solved the issue. Anyone have any suggestions?!

User avatar
bourneyo
The Boss
The Boss
Posts: 597
Joined: Sun Apr 13, 2008 11:01 pm
Location: Leicester
Contact:

Re: rear brake probs

Post by bourneyo » Sun Sep 28, 2008 12:26 am

Hello saturdaynightbeaver, welcome to the forum!

did both set of shoes look about even? some cowboy hadnt fitted new shoes on the left but not the right?

or it could be air in the rear right brake line.

Dan 8-)
http://www.suzukiclubuk.co.uk the new home for your suzuki sj

saturdaynightbeaver
Got muddy boots
Got muddy boots
Posts: 11
Joined: Sat Sep 27, 2008 9:22 pm

Re: rear brake probs

Post by saturdaynightbeaver » Sun Sep 28, 2008 1:15 pm

Cheers mate :mrgreen:
Well the shoes look fairly even, but looking through the MOT certificates, last MOT the left brake pipe had to be replaced & it looks like the cylinder is new. But i will have a look at bleeding the right side through. Anythings worth a shot i suppose...

Are there any pressure bias valves that could possibly be sticking/faulty?

User avatar
bourneyo
The Boss
The Boss
Posts: 597
Joined: Sun Apr 13, 2008 11:01 pm
Location: Leicester
Contact:

Re: rear brake probs

Post by bourneyo » Sun Sep 28, 2008 8:42 pm

there is only one bias valve for front/back and that is mounted to the chassis on the drivers side, that wouldnt affect right/left.

If one sides cylinder has been replaced and the other side hasn't that may also affect the breaking!

Dan 8-)
http://www.suzukiclubuk.co.uk the new home for your suzuki sj

User avatar
dan_2k_uk
I spend far too much time on here
I spend far too much time on here
Posts: 4924
Joined: Tue May 06, 2008 5:19 pm
Location: Swindon, Wiltshire

Re: rear brake probs

Post by dan_2k_uk » Mon Sep 29, 2008 2:01 pm

just to let you know ive got adjusters from an e30 bmw 3 series on mine as mine had totally seised. Nearly identical. Cant remember if they are handed. Ive got a funny feeling i had to fit them to opposite sides than they went on the beemer! Not sure!!!
Image
Janspeed manifold, LWB Vit vented discs and calipers

Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.

Post Reply