- trots jeep.JPG (49 KiB) Viewed 24891 times
trotters sammy... updated finally
trotters sammy... updated finally
well after a break of a couple of years, its finally happened the car has gone and this has arrived fresh off the boat from the wight isle
Last edited by trotter on Tue Nov 25, 2014 10:58 pm, edited 6 times in total.
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: trotters new sammy
back and 
for making me breathe smoke the whole way back!
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
Re: trotters new sammy
welcome back to Suzukis man! Once Dans and mine are back on the road we'll all have to head out laning! 
Re: trotters new sammy
back to the world of Suzuki. 
86 SJ413 tin top, 1.6 8v, SU carb, YJ spring conversion, virtual lift, 33x12.5x15 KL71's, rocklobster, rear discs, power steering.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: trotters new sammy
Seeing as trotter is to lazy to sort this out I'm going the whole 140 metres to his this weekend to whip the body off, weld the body mounts, and put it back on.
Seems easier than arseing about trying to jack the body enough to get a plate in there and then weld from undeneath with the chassis in the way.
Anyone taken a body off with front clip still attached?
Dan
Seems easier than arseing about trying to jack the body enough to get a plate in there and then weld from undeneath with the chassis in the way.
Anyone taken a body off with front clip still attached?
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: trotters new sammy
Went round today and did a 'Scottie impression' in-between the near constant rain.
Didn't help that whoever did the arches before had welded the front clip to the body.
We got it off though and the body is all disconnected and ready to lift off in the morning.
Start
Middle
End
Dan
Didn't help that whoever did the arches before had welded the front clip to the body.
We got it off though and the body is all disconnected and ready to lift off in the morning.
Start
Middle
End
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
dan_2k_uk
- I spend far too much time on here
- Posts: 4924
- Joined: Tue May 06, 2008 5:19 pm
- Location: Swindon, Wiltshire
Re: trotters new sammy
Well I've deffo done a Scottie impression today!
O/S Body mount
And one for fun
Hopefully he gets a move on with it now!
Dan
O/S Body mount
And one for fun
Hopefully he gets a move on with it now!
Dan
Janspeed manifold, LWB Vit vented discs and calipers
Build thread -- Build photos -- HLA-Artwork
Coming soon: YJs, Trussed axles, Full float rear.
-
ianedwards
- SCUK Addict
- Posts: 878
- Joined: Thu Sep 15, 2011 8:23 pm
- Location: Brecon Powys
Re: trotters new sammy
nice, like the last pic, lol
Ian
Ian
Cheers
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Ian.
1987 Suzuki SJ413 KJA - Fixed + Modified in my own way
Re: trotters new sammy
as always it kinda snowballs from just a quick whip off and weld a patch in to 'how the hell did this ever not fall to bits when i drove it home ffs!' ah well guess its my turn to upset all the neighbours with Mr angry!!
if in doubt, FLAT OUT!
mans tool kit > duct tape, wd40 and a bfh is all you ever need
mans tool kit > duct tape, wd40 and a bfh is all you ever need